Quick Rider 1700–3000 Vertical Windlass — Drill Template
DRILL TEMPLATE
The Quick drilling template for the Rider 1700, 2000, 2300 and 3000 W vertical windlasses, with its hole table.
DocumentQuick Rider 1700–3000 Vertical Windlass Drill Template
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Rider 1700 - 2000W / 2300 - 3000W Drilling Template
| mm | inch | |
|---|---|---|
| A | ø11 | ø7/16 |
| B | ø65 | ø2"1/2 |
| C | ø190 | ø7"31/64 |
| D | 59 | 2"21/64 |
- A = five fixing holes on the base circle; B = central cut-out; C = base outline diameter; D = distance from the centreline to each chain line (port and starboard chain positions are drawn).
- The bow (PRUA / BOW) arrow on the sheet shows the orientation.
- A3 sheet at 1:1: print it at 100% and check the 4" / 100 mm scale bar before drilling.
Quick publishes only this drilling template for the Rider 1700–3000 range; for installation, wiring and use refer to the dealer documentation supplied with the windlass.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
