Ronstan RF85711A, RF105711A, RF125711A & RF145711A Exit Blocks — Drill Template
DRILL TEMPLATE
Full-size mounting and drilling templates for the Ronstan RF85711A, RF105711A, RF125711A and RF145711A exit blocks, with fastener size and key template dimensions for each.
DocumentRonstan RF85711A, RF105711A, RF125711A & RF145711A Exit Blocks Drill Template
FormatPDF · 1 page · 0.5 MB
LanguageEnglish
Download PDF ▾
Mounting Templates
| Part no. | Fasteners | Hole Ø | Overall length | Overall width |
|---|---|---|---|---|
| RF85711A | 3 × M8mm (5/16") | 8.2mm | 188mm | 34.5mm |
| RF105711A | 3 × M10mm (3/8") | 10.2mm | 226mm | 39mm |
| RF125711A | 3 × M12mm (1/2") | 12.2mm | 263mm | 45mm |
| RF145711A | 3 × M12mm (1/2"), high tensile stainless steel Grade A4-80 | 12.2mm | 286mm | 47mm |
Print each template at 1:1 (actual size, no "fit to page") on A4 and check that the printed dimensions match the drawing before you drill. Ronstan states the drawings are for deck plans and some details are omitted.
Using the Template
- Each template shows the plate outline, the line exit slot and three fastener holes: two together at one end and one beyond the slot at the other.
- Scale 1:1, page size A4. Download the template for your block size from the list below.
- Mark the hole centres and the slot outline from the printed template; drill the holes to the diameter shown.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
