DESCRIPTION

Split pins must be 1.5 x the diameter of the clevis pins in length, and the legs must be bent min. 2x10˚ to lock them. If opened up more than this, they are difficult to remove. Split pins that have been opened more than 10 times must be replaced All split pins should be protected with fabric tape. A spinnaker or gennaker can easily be torn by a sharp split pin end, and running rigging can get hooked in a split pin. This will damage the split pin and could pull it out of the clevis pin, allowing the clevis pin to fall out of the associated fitting

FEATURES

  • SubType: pin Diameter: 3.00 mm Length: 20 mm RigScrewMatch: 7/16" 1/2" ForkTerminalMatch: 6 7.

TECHNICAL INFORMATION


DescriptionImperialMetric
Sub-Typepinpin
Diameter0.12 in3 mm
Length0.79 in20 mm
RigScrewMatch7/16" 1/2"7/16" 1/2"
ForkTerminalMatch6 76 7
Weight0.04 oz.1.00 g.

KNOWLEDGE BASE

Selden Hydraulic Boom B290 & B380 — Spare Parts ListSpare parts for the Seldén B290 and B380 hydraulic booms: end fittings, outhaul car and running blocks, hydraulic.View Manual →
Selden Furlex 104TD — Owner's ManualInstallation, forestay and luff-extrusion calculations, sail data, maintenance, troubleshooting and the complete spare.View Manual →