Selden Furlex Prefeeder — Instructions
INSTRUCTIONS
The one rule for tying the Furlex prefeeder so it guides the luff tape correctly.
DocumentSelden Furlex Prefeeder Instructions
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Tying the Prefeeder
To make the prefeeder work properly it must be correctly tied to the cord: it should not be possible to pull it further out than 300 mm (12") at maximum tension.
- Tie the prefeeder cord as shown in the drawing, so that the stretched prefeeder ends no more than 300 mm from its tie-off point.
- Check the assembly instructions in your Furlex manual.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
