Selden Linked Spreader Ends V45/V55/V65 — Instructions
INSTRUCTIONS
Assembly numbers, strip sizes, pins and terminal sizes for Selden V45, V55 and V65 linked spreader ends, with the assembly drawings for linked single and double spreader rigs.
DocumentSelden Linked Spreader Ends V45/V55/V65 Instructions
FormatPDF · 1 page · 0.6 MB
LanguageEnglish
Download PDF ▾
Spreader End for Linked Rigging
- For linked lateral rigging on 30'-70' yachts; works with both wire and rod rigging with stemball terminals.
- Minimal distance from shroud to the edge of the spreader end, so the jib can be sheeted close to the shroud.
- Big smooth surface, no tape required; no split pins to catch sails or halyards.
- Cast stainless steel, AISI316.
V55 / V65 Assemblies
Circled numbers are the items in the drawing below; VU = upper vertical (eye), VL = lower vertical (fork), D = diagonal. 1) hole Ø 25.5 mm (red).
V45 Assemblies
| Assy no | ③ | ④ | ⑤ | ⑥ Alt. A/B | ⑦ | VU eye | VL fork | D |
|---|---|---|---|---|---|---|---|---|
| 500-674-01 | 0 | 1 | 50x5 | Ø 15/B | M12 | Ø 14 | Ø 14 | Ø 10, Ø 12 (3/4") |
| 500-674-02 | 0 | 1 | 50x5 | Ø 15/B | M12 | Ø 14 | Ø 14 | Ø 8, Ø 10 (5/8") |
| 500-674-03 | 0 | 1 | 50x4 | Ø 13/B | M12 | Ø 12 | Ø 14 | Ø 7, Ø 8 (1/2") |
| 500-674-05 | 2 | 1 | 50x4 | Ø 13/B | M12 | Ø 12 | Ø 12 | Ø 7, Ø 8 (1/2") |
| 500-674-07 | 2 | 1 | 50x4 | Ø 13/A | 2) | Ø 10 | Ø 12 | Ø 7, Ø 8 (1/2") |
| 500-674-08 | 2 | 1 | 50x4 | Ø 11/A | 2) | Ø 10 | Ø 12 | Ø 6, Ø 7 (7/16") |
| 500-674-09 | 2 | 1 | 50x4 | Ø 13/A | 2) | Ø 10 | Ø 10 | Ø 7, Ø 8 (1/2") |
| 500-674-10 | 2 | 1 | 50x4 | Ø 11/A, Ø 9.5/A | 2) | Ø 10 | Ø 10 | Ø 6, Ø 7 (7/16"); Ø 5, Ø 6 (3/8") |
| 500-674-12 | 4 | 2 | 50x2.5 | Ø 9.5/A, Ø 8/A | 2) | Ø 7 | Ø 8 | Ø 5, Ø 6 (3/8"); Ø 4, Ø 5 (5/16) |
| 500-674-13 | 0 | 1 | 50x5 | Ø 15/B | M12 | Ø 12 | Ø 14 | Ø 8, Ø 10 (5/8") |
| 500-674-14 | 2 | 1 | 50x5 | Ø 15/B | M12 | Ø 12 | Ø 12 | Ø 8, Ø 10 (5/8") |
| 500-674-15 | 2 | 1 | 50x5 | Ø 15/B | M12 | Ø 10 | Ø 12 | Ø 8, Ø 10 (5/8") |
2) Use the rigging screw pin.
Assembly Drawing
- Drawings 595-113-E (single) and 595-112-E (double spreader rig) name the parts: end plug, strips, eye, fork, nylon washer, pin.
- Nylon washers between the strips fill out excessive play.
- The strips can also be mounted outside the rigging screw fork.
- Upper cap fitted to the end plug according to "Hints and advice".
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
