We Ship Worldwide! Shipping information.
INSTRUCTIONS

Fitting, fasteners and main dimensions for the Spinlock BE bulls eye fairleads – BE06, BE10/TF, BE12/TF, BE16/TF and the BE10/2 and BE10/3 multiple bulls eyes – with the drill guides and dimension sheets for each model.

DocumentSpinlock BE Bulls Eye Instructions
FormatPDF · 2 pages · 1.4 MB
LanguageEnglish
Download PDF ▾
InstructionsPDF · 2 p.Drill guide BE06PDF · 1 p.Drill guide BE10/TF (1:1)PDF · 1 p.Dimensions BE10/2 (1:1)PDF · 1 p.Dimensions BE10/3 (1:1)PDF · 1 p.Drill guide BE12/TF (1:1)PDF · 1 p.Drill guide BE16/TF (1:1)PDF · 1 p.
View Collection
InstallationSpecificationsDimensionsDrill GuidesSafetyProducts
Spinlock BE Bulls Eye — Instructions

Installation

  1. Position the bulls eye in the desired location.
  2. Mark and drill the holes.
  3. Fasten the unit securely to the deck.
  4. BE bulls eyes are self-sealing with the silicone gasket provided.

BE10/2 and BE10/3: do not over-tighten the fixings. The dimension sheets show them mounted on top of a T25/3Y deck organiser.

Fasteners and Line Size

Model Max line Fasteners Notes
BE06 Ø7 bore 1 × M4 CSK (5/32") (drill guide) Instructions: 2 × M4 (5/32") CSK, DIN7991 View part →
BE10/TF 10.0mm 2 × M4 countersunk, min. spec A4-50 to DIN7991 / ISO 10642 (drill guide) Instructions: 2 × M5 (3/16") CSK, DIN7991 View part →
BE12/TF 12.0mm 2 × M5 countersunk, min. spec A4-50 to DIN7991 / ISO10642 View part →
BE16/TF 16.0mm 2 × M6 countersunk, min. spec A4-50 to DIN7991 / ISO 10642 Instructions: 2 × M6 (1/4") View part →
BE10/2 Up to Ø10mm 3 × M5 CSK A4-70 Weight 16g View part →
BE10/3 Up to Ø10mm 4 × M5 CSK A4-70 Weight 24g View part →

The instructions and the drill guides disagree on the BE06 and BE10/TF fastener size and count; check the holes in your bulls eye before choosing fasteners.

Dimensions (mm)

Model Length Width Height Rope centreline above mounting surface Fixing centres
BE06 23.9 19.9 17.9 10.4 Single fixing
BE10/TF 32.8 27.8 24.4 12.8 20.00
BE12/TF 39.3 33.3 29.3 15.5 24.00
BE16/TF 52.4 44.4 39.0 20.5 32.0
BE10/2 80 16 24 13 32 (3 holes)
BE10/3 112 16 24 13 32 (4 holes)

The TF bulls eyes are a body moulding with a wire insert and gasket. Values from the drill guides and dimension sheets; the line drawings in the instructions are not to scale.

Drill Guides

  • One download per model: BE06, BE10/TF, BE12/TF and BE16/TF drill guides, and BE10/2 and BE10/3 dimension sheets.
  • The TF guides and the BE10/2 and BE10/3 sheets are drawn 1:1 on A4 (297 × 210). Print at actual size, never "fit to page", and measure the fixing centres before drilling.

Safety

  • Check the product is correctly specified for your application, load and line size, and that it is correctly installed before its first use under load.
  • Braided fibre rope only – never three-strand or wire rope. Never use the product if it is damaged or worn, or with damaged rope.
  • Never use cleaning or lubricating solvents, polysulphide or polyurethane based sealants: they degrade the product. Do not modify any part.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual