We Ship Worldwide! Shipping information.
DRILL TEMPLATE

Deck thickness, hole size, supplied studs, loads and dimensions for the Spinlock TWR/30 and TWR/44 rotating-sheave deck feeders, from their 1:1 drill guides.

DocumentSpinlock TWR/30 & TWR/44 Drill Guides
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Download PDF ▾
Drill TemplatePDF · 1 p.Drill guide TWR/44 (1:1)PDF · 1 p.
View Collection
SpecificationsDimensionsInstallationProducts
Spinlock TWR/30 & TWR/44 — Drill Guides

Specifications

Part no. Max sheave load Max line size Stud (supplied) Weight
TWR/30 2000KG 24MM M8 A4-80 stud + M8 Nyloc nut 175g View part →
TWR/44 2500kg 24mm M12 A4-80 stud + M12 Nyloc nut 320g View part →

Dimensions (mm)

Model Top Ø Sheave Ø Height above deck Sheave height Stud below deck Deck thickness Deck hole
TWR30 Ø44 Ø29 33 25 / 14 65 10-57MM Drill 12.5 (Ø12.0 axle)
TWR44 Ø61 Ø44 50 40 / 22 64 10-57MM Drill 12.5 (Ø12.0 axle)

The TWR30 drawing labels its Ø29 sheaves "TSR30" (as printed).

Fitting

  • Apply sealant/jointing compound under the base.
  • Apply thread lock between the stud and the axle.
  • Both drill guides are 1:1 on A4. Spinlock's warning: if you use the drawing as a template, set the printer for the drawing scale and always check the dimensions.

Spinlock publishes no separate instructions for the TWR; these are the drill guides only.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual