We Ship Worldwide! Shipping information.
INSTALLATION MANUAL

Versions, drilling sizes and the pictorial assembly sequence for the Vetus type 6 flexible shaft coupling.

DocumentVetus Flexible Coupling Type 6 Installation Manual
FormatPDF · 1 page · 0.1 MB
LanguageEnglish
Download PDFBuy
VersionsProducts
Vetus Flexible Coupling Type 6 — Installation Manual

Versions and Bolt Sets

Part Description
KO51 Type 6, shaft 25 mm View part →
KO52 Type 6, shaft 30 mm View part →
KO53 Type 6, shaft 35 mm View part →
KO54 Type 6, pilot bored 20 mm View part →
SET64 Set bolts for flange Velvet 4" Ask us to source it →
SET65 Set bolts for flange Velvet 5" Ask us to source it →

Locking Holes

Shaft ø D ø A ø B
25 8 5
30 10 6
35 8 (2x) 5 (2x)

The exploded drawing shows drilling the shaft (øA, øB) for the locking pin(s), the coupling halves and rubber element, Molykote on the hub and a 500 mm (20") lever for tightening. Follow the drawing in the PDF.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual