INSTALLATION MANUAL

Positioning, linkage geometry, wiring and centring of the Vetus RUDDS rudder feedback unit that drives the RUDDB, RUDDN and RUDDW 52 mm rudder angle indicators.

DocumentVetus Rudder Feedback Unit RUDDS Installation Manual
FormatPDF · 30 pages · 3.2 MB
LanguageEnglish
Vetus Rudder Feedback Unit RUDDS — Installation Manual

Technical Specifications

Item Value
For use with Rudder angle indicators RUDDB, RUDDN and RUDDW
Supply voltage 12 or 24 Volt DC
Resistance 0 – 190 Ω (center position 95 Ω)
Principal dimensions 72 mm (2 53/64") and 54,3 mm (2 9/64"); body ø48 mm, base ø39,8 mm; 49 mm and 15 mm

Install in a dry, well-ventilated space, never outside. Check the supply voltage (12 or 24 Volt) before connecting.

Mounting

  • Position the unit so the rudder shaft and the feedback unit axis rotate in the same direction.
  • The unit arm must follow the tiller closely; unit arm and tiller move in unison.
  • Distance H (rudder shaft centre to tiller connection) must equal the distance from the unit centre to its arm connection.
  • Choose R to suit the space available, preferably as long as possible.
  • Fix with the screws supplied.
  • Wire the supply as the diagram and run a cable from the feedback unit to each instrument (wiring: sensor signal, red light, yellow light).

Centring the Axis

  1. Switch on the supply to feedback unit and gauge.
  2. Put the rudder in the middle position.
  3. Slightly loosen the three screws.
  4. Gently rotate the unit left or right until the gauge reads neutral.
  5. Tighten the screws. One global setting is enough; each gauge can be fine-adjusted individually.
  6. Move the rudder and check the port-to-starboard indication is correct.

Service Parts

Pos. Part Description
1 RUDDSROD Connecting rod
2 HELM_ Rudder arm (size to suit the rudder shaft)

Ask us to source the connecting rod. The rudder arm part number depends on the rudder shaft diameter.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Manual