DESCRIPTION

Built to hold motors up to 100 lb/45 kg (about 15 hp). Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape … no more varnishing! Comes complete with hardware to attach to any standard 1 in (2.5 cm) stainless rail. Bottom cleat comes unattached so that it will fit any rail spacing.

Our Part # EDS-521-100ST | Mfr. Part # 521-100ST

FEATURES

  • Securely mounts outboard motors.
  • Fits 1.0 inch (25.4 mm) stern rails.
  • Heavy-duty stainless steel construction.
  • Provides stable motor support.

TECHNICAL INFORMATION


DescriptionImperialMetric
Max Line Speed100 ft/min30.5 m/min
Max Pull110.0 lb50.0 kg
Voltage12V12V
Weight10.0 lb4.5 kg
Size1.0 in25.4 mm

KNOWLEDGE BASE

Edson Outboard Motor Mount 521ST — Installation InstructionsParts, tools and the six-step fitting sequence for the Edson 521ST outboard motor mount on a stern rail, from fitting.View Manual →
Edson Traditional Steering Systems & Accessories — CatalogueA guide to the Edson Traditional Steering Systems & Accessories catalogue (World Edition T-1): traditional wheels and.View Selection Guide →
Edson Marine Electronics Mounting Systems — CatalogueWhat is in the Edson Marine Electronics Mounting Systems catalogue (R-8-14) and the key order numbers for NavCom radar.View Selection Guide →