Harken Code Zero, Carbo Racing Foil & Hydraulic Furling — Catalogue Pages
CATALOGUE
View Collection
Archived Harken catalogue pages for the Carbo Racing Foil, Code Zero furlers, carbon furling and MKIII hydraulic furling Units 3 to 4.5, with the hydraulic furler sizing table.
DocumentHarken Code Zero, Carbo Racing Foil & Hydraulic Furling Catalogue Pages
FormatPDF · 1 page · 0.2 MB
LanguageEnglish
Download PDF ▾
What Each Page Covers
| Download | What it covers |
|---|---|
| Catalogue p.150 – Carbo racing foil | Carbo Racing Foil kits 7000, 7001, 7002 (twin-groove head foils for mast-up installation), aluminum chafe guards 7000.30, 7001.30, 7002.30, 7003, 7006 prefeeder |
| Catalogue p.153 – Code Zero | Code Zero furlers 3100, 3101, 3115, 3126, 3127, 3128 for free-flying asymmetrical headsails, screechers and staysails on boats up to 125 ft (38 m) |
| Catalogue p.167 – carbon reefing & furling | Carbon furlers: all-carbon foils and carbon drum/torque tube components, Spectra line attachments, #6 luff tape only |
| Catalogue p.168 – carbon Unit 3–4.5 | Carbon Units 3C to 4.5C: boat length, rod and clevis pin sizes, headstay lengths, systems 1120, 1121 …, optional foil/connector kits (1116–1119, 1125–1128) |
| Catalogue p.169 – hydraulic details | MKIII hydraulic furler features: independent swivels, triple-interlock foils, stainless gear housing, manual override |
| Catalogue p.170 – hydraulic Units 3–4.5 | Hydraulic Units 3 to 4.5 part numbers (1027, 1028, 1044, 1045 …) and optional extra foils and connectors (958, 960, 997, 1032, 1050, 1051, 1066, 1069, 1079, 1086) |
| Catalogue p.171 – hydraulic dimensions | Hydraulic furling ordering information (table below), furling and foil dimensions A–L |
| Code Zero dimensions (catalogue p.154) | Code Zero dimensions C0-00 to C0-4 and accessories 3105–3114, 3116–3120 (from the 3105 2:1 fairlead) with loads |
| Hydraulic furling (catalogue pages) | Hydraulic furling for cruising boats 50 to 120' (15 to 36.6 m): features, manual tensioning, dimensions |
Archived pages of an earlier Harken marine catalogue: many part numbers have since been superseded, so check a part against the current catalogue before ordering.
Hydraulic Furling Ordering Information (catalogue p.171)
| Unit | Wire Ø | Rod Ø | Headstay length standard / max | Clevis pin Ø |
|---|---|---|---|---|
| 3 | 7/16", 1/2" (11, 12 mm) | -22 (9.53 mm), -30 (11.10 mm) | 75'6" (23.01 m) / 82'6" (25.15 m) | 3/4" (19.10 mm), 7/8" (22.20 mm) |
| 3.25 | 9/16" (14 mm) | -40 (12.70 mm) | 75'6" (23.01 m) / 89'6" (27.28 m) | 7/8" (22.20 mm), 1" (25.40 mm) |
| 3.5 | 5/8", 3/4" (16, 19 mm) | -48 (14.30 mm) | 77'4" (23.57 m) / 95'4" (29.06 m) | 7/8" (22.20 mm), 1" (25.40 mm), 1 1/8" (28.60 mm) |
| 4 | 7/8" (22 mm) | -60 (16.80 mm), -76‡ (17.90 mm) | 87'11" (26.80 m) / 114'11" (35.03 m) | 1 1/4" (31.80 mm) |
| 4.5 | 1" (25 mm) | -76 (17.90 mm), -91 (19.50 mm), -115 (22.20 mm) | 102'7" (31.27 m) / 126'7" (38.58 m) | 1 1/4" (31.80 mm), 1 3/8" (34.90 mm), 1 9/16" (39.70 mm) |
- Wire sizes do not apply to Dyform wire; contact Harken if the rod is other than Nitronic 50. Carbon units use rod only.
- ‡ Continuous rod only – if sectional, order Unit 4.5.
- All units take #6 luff tape (6/32 in, 5 mm). Order one extra connector for each extra foil extrusion.
- Code Zero furling needs very high luff tension; the lower unit has a quick sail disconnect (spring-loaded button) and the sheave arms open to remove the line for quick unfurling.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
