SELECTION GUIDE

Harken hardware for spinnaker pole cars (2:1 and 3:1), spinnaker halyard exits and bowsprit pole launchers, with part numbers for small, midrange and big boats.

DocumentHarken Spinnaker Pole Handling Selection Guide
FormatPDF · 1 page · 1.3 MB
LanguageEnglish
Harken Spinnaker Pole Handling Selection Guide

How to Read the Table

Column Typical boat length
Small boat 6.7 – 8.5 m (22 – 28')
Midrange 8.8 – 10.4 m (29 – 34')
Big boat 10.7 – 12.8 m (35 – 42')

Part numbers represent the hardware most commonly used. Letters match the diagrams. Linked numbers are in stock at MauriPro.

Spinnaker Pole Handling & Halyards

Ref. Description Small boat Midrange Big boat
2:1 Spinnaker Pole Lets the inboard end of the pole be moved under load; continuous adjuster line and 2:1 controls.
A Spinnaker pole car 3188 → 3189 → 3097 →
B Single 2146 → 2148 → 2148 →
C Cam cleat 150 → 150 → 150 →
D Cheek 350 → 2644 → 2644 →
E Eyestrap 201 073 137
3:1 Spinnaker Pole Adjustable system with 3:1 controls for more power.
A Spinnaker pole car 3188 → 3189 → 3097 →
B Single 2146 → 2149 → 2152 →
C Cam cleat 150 → 150 → 150 →
D Cheek 350 → 2644 → 2644 →
Spinnaker Halyard through Spar Cam cleat below the halyard exit so crew can jump the halyard and cleat it at the mast during the set; the cam also holds the line if the sail fills early.
A Exit block 089 → 134 → —
B Cam cleat 150 → 150 → —
Pole Launcher For asymmetric spinnakers and retractable bowsprits: launcher line on top of the pole, strong shockcord underneath retracts the pole when the launcher line is uncleated.
A Single 340 → — —
B Single w/becket 341 → — —
C Bullseye 237 → — —
D Eyestrap 137 — —

Harken spinnaker pole car, halyard exit and pole launcher diagrams

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Selection Guide