Ronstan Batten System Selector – Part 2 (PDF) – Page 3

SELECTION GUIDE

Ronstan batten car system selectors, one per track series: size limits by hull LOA and sail area, and every component with its part number and length, to spec a full-batten mainsail system with your sailmaker.

DocumentRonstan Batten System Selector

FormatPDF · 1 page · 0.2 MB

LanguageEnglish

Download PDF ▾

View Collection

Series 26 Series 30 Series 42 Ballslide Products

This manual is split into 2 pages: Part 1 → · Part 2

Track Series 26 & 26 Captive Ball

Series 26

Part No.	Component	Size / notes
RC1261-2.0	Track, 2 metres	Actual length 1975mm (77 13/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 27	View part →
RC1261-3.0	Track, 3 metres	Actual length 3025mm (119 3/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 41	View part →
RC1261-6.0	Track, 6 metres	Actual length 6025mm (237 3/8"); hole pitch 75mm (2 31/32"); Fastening slugs = 81	Ask us to source it →
RC1261J	Track joiner		View part →
RC00332	Track fixing slug	Slugs include M6 csk fasteners; see the Ronstan website for the track fixing slug selection table	Ask us to source it →
RC00333	Track fixing slug		Ask us to source it →
RC00341	Track fixing slug		View part →
RC00343	Track fixing slug		View part →
RC00380	Track fixing plate		Ask us to source it →
RC12680	End stop (top)	L=34mm (1 11/32")	View part →
RC12660	Headboard car	L=225mm (8 7/8")	Ask us to source it →
RC00011	Headboard plates (pair)		View part →
RC12663	Intermediate car	L=70mm (2 3/4"); typically 6 per system	View part →
RC12669	Quick release batten car	L=100mm (3 15/16"); typically 5 per system	View part →
RC12672	Reef car	L=90mm (3 17/32"); replaces an intermediate car at each reef point	View part →
RC00253	Quick release batten receptacle link		View part →
RC00212	Quick release batten receptacle link		View part →
RC00213	Quick release batten receptacle link		View part →
RC1269-0.3	Standard gate track / car stack section	L=325mm (12 13/16"); hole pitch 75mm (2 31/32"); fastening slugs = 5	View part →
RC12681	End stop (bottom)	L=55mm (2 5/32")	View part →

Series 26 Captive Ball

Part No.	Component	Size / notes
RC1261-2.0	Track, 2 metres	Actual length 1975mm (77 13/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 27	View part →
RC1261-3.0	Track, 3 metres	Actual length 3025mm (119 3/16"); hole pitch 75mm (2 31/32"); Fastening slugs = 41	View part →
RC1261-6.0	Track, 6 metres	Actual length 6025mm (237 3/8"); hole pitch 75mm (2 31/32"); Fastening slugs = 81	Ask us to source it →
RC1261J	Track joiner		View part →
RC00332	Track fixing slug	Slugs include M6 csk fasteners; see the Ronstan website for the track fixing slug selection table	Ask us to source it →
RC00333	Track fixing slug		Ask us to source it →
RC00341	Track fixing slug		View part →
RC00343	Track fixing slug		View part →
RC00380	Track fixing plate		Ask us to source it →
RC12680	End stop (top)	L=34mm (1 11/32")	View part →
RC42660	Headboard car	L=236mm (9 5/16")	View part →
RC00011	Headboard plates (pair)		View part →
RC42663	Intermediate car	L=64mm (2 1/2"); typically 6 per system	View part →
RC42669	Quick release batten car	L=115mm (4 11/16"); typically 5 per system	View part →
RC42672	Reef car	L=90mm (3 9/16"); replaces an intermediate car at each reef point	View part →
RC00253	Quick release batten receptacle link		View part →
RC00212	Quick release batten receptacle link		View part →
RC00213	Quick release batten receptacle link		View part →
RC1269-0.3	Standard gate track / car stack section	L=325mm (12 13/16"); hole pitch 75mm (2 31/32"); fastening slugs = 5	View part →
RC12681	End stop (bottom)	L=55mm (2 5/32")	View part →

Track Series 30 & 30 Captive Ball

Series 30

Part No.	Component	Size / notes
RC1301-2.0	Track, 2 metres	Actual length 2025mm (79 25/32"); hole pitch 100mm (3 15/16"); Fastening slugs = 21	View part →
RC1301-3.0	Track, 3 metres	Actual length 3025mm (119 3/16"); hole pitch 100mm (3 15/16"); Fastening slugs = 31	View part →
RC1301-6.0	Track, 6 metres	Actual length 6025mm (237 3/8"); hole pitch 100mm (3 15/16"); Fastening slugs = 61	Ask us to source it →
RC1301J	Track joiner		View part →
RC00360	Track fixing slug	Slugs include M8 csk fasteners	View part →
RC13080	End stop (top)	L=37mm (1 15/32")	View part →
RC1308-1.5	Headboard car track (additional section) *	L=1500mm (59 3/32"); hole pitch 37.5mm (1 15/32"); fastening slugs = 40	Ask us to source it →
RC13060	Headboard car	L=255mm (10 1/16")	View part →
RC00012	Headboard plates (pair)		View part →
RC13063	Intermediate car	L=78mm (3 1/16"); typically 6 per system	View part →
RC13069	Quick release batten car	L=130mm (5 1/8"); typically 5 per system	View part →
RC13072	Reef car	L=130mm (5 1/8"); replaces an intermediate car at each reef point	View part →
RC00213	Quick release batten receptacle link		View part →
RC1309-0.4	Standard gate track / car stack section	L=400mm (15 3/4"); hole pitch 100mm; fastening slugs = 4	View part →
RC13081	End stop (bottom)	L=65mm (2 9/16")	View part →

Series 30 Captive Ball

Part No.	Component	Size / notes
RC1301-2.0	Track, 2 metres	Actual length 2025mm (79 25/32"); hole pitch 100mm (3 15/16"); Fastening slugs = 21	View part →
RC1301-3.0	Track, 3 metres	Actual length 3025mm (119 3/16"); hole pitch 100mm (3 15/16"); Fastening slugs = 31	View part →
RC1301-6.0	Track, 6 metres	Actual length 6025mm (237 3/8"); hole pitch 100mm (3 15/16"); Fastening slugs = 61	Ask us to source it →
RC1301J	Track joiner		View part →
RC00360	Track fixing slug	Slugs include M8 csk fasteners	View part →
RC13080	End stop (top)	L=37mm (1 15/32")	View part →
RC1308-1.5	Headboard car track (additional section) *	L=1500mm (59 3/32"); hole pitch 37.5mm (1 15/32"); fastening slugs = 40	Ask us to source it →
RC43060	Headboard car	L=255mm (10 1/16")	View part →
RC43061	Headboard car, long	L=337mm (13 9/32")	View part →
RC00012	Headboard plates (pair)		View part →
RC43063	Intermediate car	L=69mm (2 23/32"); typically 6 per system	View part →
RC43069	Quick release batten car	L=119mm (4 11/16"); typically 5 per system	View part →
RC43072	Reef car	L=119mm (4 11/16"); replaces an intermediate car at each reef point	Ask us to source it →
RC00213	Quick release batten receptacle link		View part →
RC1309-0.4	Standard gate track / car stack section	L=400mm (15 3/4"); hole pitch 100mm; fastening slugs = 4	View part →
RC13081	End stop (bottom)	L=65mm (2 9/16")	View part →

* Additional headboard track sections: see Overview.

Track Series 42

Part No.	Component	Size / notes
RC1420-X.X	Track, 2 metres	Actual length 1996mm (78 5/8"); hole pitch 100mm (3 15/16"); M10 (3/8") csk fasteners = 20 (not included)	Ask us to source it →
RC1420-X.X	Track, 3 metres	Actual length 2996mm (118 11/16"); M10 csk fasteners = 30 (not included)	Ask us to source it →
RC1420-X.X	Track, 6 metres	Actual length 5996mm (236 1/4"); M10 csk fasteners = 60 (not included)	Ask us to source it →
RC1421J	Track joiner		View part →
RC1422-2.0	Luff groove track, 2 metres	Actual length 2025mm (79 25/32"); undrilled	View part →
RC1422-3.0	Luff groove track, 3 metres	Actual length 3025mm (119 3/16"); undrilled	View part →
RC1422-6.0	Luff groove track, 6 metres	Actual length 6025mm (237 3/8"); undrilled	Ask us to source it →
RC1422J	Luff groove track joiner		View part →
RC14280	End stop (top)	L=50mm (1 31/32")	View part →
RC1428-1.5	Headboard car track (additional section) *	L=1500mm (59 3/32"); hole pitch 50mm (1 31/32"); M10 (3/8") csk fasteners = 30 (not included)	Ask us to source it →
RC14260	Headboard car	L=335mm (13 3/16")	Ask us to source it →
RC00013	Headboard plates (pair)		View part →
RC14263	Intermediate car	L=85mm (3 11/32"); typically 6 per system	View part →
RC14269	Quick release batten car	L=165mm (6 1/2"); typically 5 per system	View part →
RC14272	Reef car	L=170mm (6 11/16"); replaces an intermediate car at each reef point	View part →
RC00272	Quick release batten receptacle link		Ask us to source it →
RC00263	Quick release batten receptacle link		Ask us to source it →
RC00214	Quick release batten receptacle link		View part →
RC1429-0.6	Standard gate track / car stack section	L=650mm (25 5/8"); hole pitch 100mm; M10 csk fasteners = 7 (not included)	View part →
RC1429-0.6L	Luff groove gate track	L=650mm (25 5/8"); hole pitch 100mm; M6 (1/4") csk fasteners = 14 (not included)	View part →
RC14281	End stop (bottom)	L=100mm (3 15/16")	View part →

RC1420-X.X as printed on the selector for all three track lengths. * Additional headboard track section: see Overview.

Ballslide™ Series 6 & 8

Ballslide™ Series 6

Part No.	Component	Size / notes
RC264xx	Feet required for cars	For luff groove openings greater than 9mm (3/8"); not supplied with cars; sold in pairs; fasteners included	Ask us to source it →
RC20111	Feet (pairs)		View part →
RC20112	Feet (pairs)		View part →
RC20113	Feet (pairs)		View part →
RC20114	Feet (pairs)		View part →
RC20115	Feet (pairs)		View part →
RC20116	Feet (pairs)		View part →
RC20118	Feet (pairs)		View part →
RC20119	Feet (pairs)		View part →
RC261xx	Feet supplied with cars	For luff groove openings of approximately 4.5mm (3/16")	Ask us to source it →
RC263xx	Feet supplied with cars	For luff groove openings of approximately 4.5mm (3/16")	Ask us to source it →
RC26160	Headboard car	L=160mm (6 5/16"); 2 pairs of feet required per headboard car	View part →
RC26360	Headboard car	L=160mm (6 5/16"); 2 pairs of feet required per headboard car	View part →
RC26460	Headboard car	L=160mm (6 5/16"); 2 pairs of feet required per headboard car	View part →
RC00010	Headboard plates (pair)		View part →
RC26163	Intermediate car	L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car	View part →
RC26263	Intermediate car	L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car	Ask us to source it →
RC26463	Intermediate car	L=55mm (2 5/32"); typically 6 per system; 1 pair of feet per car	View part →
RC26166	Batten car	L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car	View part →
RC26366	Batten car	L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car	View part →
RC26466	Batten car	L=68mm (2 11/16"); typically 5 per system; 1 pair of feet per car	View part →
RC00151	Batten receptacle link		View part →
RC00141	Batten receptacle link		View part →
RC00110	Batten receptacle link		View part →
RC26181	End stop	L=68mm (2 11/16")	View part →

Ballslide™ Series 8

Part No.	Component	Size / notes
RC284xx	Feet required for cars	For luff groove openings greater than 12mm (1/2"); not supplied with cars; sold in pairs; fasteners included	Ask us to source it →
RC20130	Feet (pairs)		View part →
RC20131	Feet (pairs)		View part →
RC20135	Feet (pairs)		Ask us to source it →
RC281xx	Feet supplied with cars	For luff groove openings of approximately 4.5mm (3/16")	Ask us to source it →
RC28160	Headboard car, short	L=214mm (8 7/16"); 2 pairs of feet required per headboard car	View part →
RC28460	Headboard car, short	L=214mm (8 7/16"); 2 pairs of feet required per headboard car	View part →
RC28161	Headboard car, long	L=290mm (11 7/16"); 2 pairs of feet required per headboard car	View part →
RC28461	Headboard car, long	L=290mm (11 7/16"); 2 pairs of feet required per headboard car	View part →
RC00010	Headboard plates (pair)		View part →
RC28163	Intermediate car	L=76mm (3"); typically 6 per system; 1 pair of feet per car	View part →
RC28463	Intermediate car	L=76mm (3"); typically 6 per system; 1 pair of feet per car	View part →
RC28166	Batten car (standard)	L=92mm (3 5/8"); typically 5 per system; 1 pair of feet per car	View part →
RC28466	Batten car (standard)	L=92mm (3 5/8"); typically 5 per system; 1 pair of feet per car	View part →
RC28169	Quick release batten car	L=105mm (4 1/8"); typically 5 per system; 1 pair of feet per car	View part →
RC28469	Quick release batten car	L=105mm (4 1/8"); typically 5 per system; 1 pair of feet per car	View part →
RC00152	Batten receptacle link		View part →
RC00111	Batten receptacle link		View part →
RC00252	Quick release batten receptacle link		View part →
RC00211	Quick release batten receptacle link		View part →
RC28181	End stop	L=54mm (2 1/8")	View part →

Series 6 and 8: the selector groups the headboard, intermediate and batten car numbers by foot type without naming each; xx = foot code. See the Ronstan website for mast compatibility tables. Series 8 limits: the lower values apply with the shortest headboard car and batten cars, the higher with the longest.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.