Selden Reversible Electric Winches E40rev–E66rev — Selection Guide
SELECTION GUIDE
Size a Selden reversible electric winch (E40rev to E66rev) that trims and eases under power: dimensions, line sizes, gear ratios, line speed, SWL and electric cut-off load.
DocumentSelden Reversible Electric Winches E40rev–E66rev Selection Guide
FormatPDF · 7 pages · 5.0 MB
LanguageEnglish
Remote Sail Trim, Both Ways
- Powered trimming and easing: the sheet stays in the self-tailer and back-tailer while it is adjusted in or out from push buttons at a safe distance.
- Two speeds in both directions for precise control whether trimming or easing.
- Patented ART drum (Asymmetric Rib Technology) for grip; manual operation with a standard winch handle is always available if power is lost.
- Brushless 42V motor with gear box, 6 mm² cables; machined, hard-anodized aluminium; polished marine grade stainless self-tailer.
- Runs on the SEL-Bus CAN system; synchronized with an electric Furlex, winch and furler interact for automated furling and unfurling (Synchronized Jib Furling).
Dimensions and Technical Data
| Model | Height above deck H (mm) | Base ØD (mm) | Drum Ød (mm) | Line size (mm) | Power ratio high gear | Power ratio low gear | Weight (kg) | Max line speed (m/min) | SWL (kN) | Electric cut-off load ECL (kN) |
|---|---|---|---|---|---|---|---|---|---|---|
| E40rev | 202 | Ø152 | 75 | 8-12 | 13:1 | 40:1 | 9.4 | 15 | 11.2 | 6.7 |
| E46rev | 226 | Ø184 | Ø90 | 10-14 | 13:1 | 46:1 | 12.7 | 11 | 12.9 | 9.7 |
| E52rev | 226 | Ø184 | Ø90 | 10-14 | 15:1 | 52:1 | 12.7 | 11 | 14.6 | 9.7 |
| E60rev | 279 | Ø245 | Ø120 | 10-16 | 18:1 | 60:1 | 22.8 | 8 | 16.8 | 14.7 |
| E66rev | 279 | Ø245 | Ø120 | 10-16 | 20:1 | 66:1 | 22.8 | 8 | 18.5 | 14.7 |
Below-deck drawing in the PDF shows a Ø99 motor housing and 146 / 160 mm below-deck dimensions including cable clearance.
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Selection Guide
