We Ship Worldwide! Shipping information.
DIMENSION DRAWING

Dimensions, weight, working load limit and breaking load of the Tylaska CR2 and CR8 snap shackles, fixed or swivel bail, polished or black oxide.

DocumentTylaska CR Snap Shackles Dimension Drawing
FormatPDF · 1 page · 0.9 MB
LanguageEnglish
Download PDFView Collection
OverviewDimensionsProducts
Tylaska CR Snap Shackles — Dimension Drawing

CR Snap Shackles

  • 17-4 PH stainless steel; 100% proof loaded to the working load limit (W.L.L.); made in USA.
  • Sleek, snag-resistant geometry to reduce the risk of catching on stays and fouling; captive plunger pin.
  • Locking hole: the plunger pin can be locked with a small line or zip tie – useful where snap shackles may release from severe flogging.
  • Polished stainless or black oxide finish.

Dimensions & Loads

Part no. Model Bail Finish A (in) B (in) C (in) D (in) Weight (oz) WLL (lb) Breaking load (lb)
TY1102 CR2 Fixed Polished stainless .38 .26 1.38 .80 .43 1000 2000 View part →
TY1102-BL CR2 Fixed Black oxide .38 .26 1.38 .80 .43 1000 2000 View part →
TY1108-FB CR8 Fixed Polished stainless .96 .74 3.17 1.74 3.5 4410 8820 View part →
TY1108-FB-BL CR8 Fixed Black oxide .96 .74 3.17 1.74 3.5 4410 8820 View part →
TY1108-S CR8 Standard swivel Polished stainless .96 .54 3.65 1.74 4.5 4410 8820 View part →
TY1108-S-BL CR8 Standard swivel Black oxide .96 .54 3.65 1.74 4.5 4410 8820 View part →

ØA = opening at the hook, B = bail opening (ØB on the fixed bail), C = overall length, D = body width – as shown on the drawings in the PDF.

Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.

Products in this Selection Guide