DESCRIPTION
DESCRIPTION
A female bayonet inboard end compatible with Seldén bayonet peak spinnaker pole cars. Push it on to the peak and a spring loaded release trigger will engage the pole to the car. When a pole is stored vertically by the means of a Vertical Pole Stowage system (VPS), we recommend that the release trigger is secured in locked position by tightening a Nylon screw inserted in the trigger.
A sheave at the lower part of the fitting is used for a Trip-trigger release line and a sheave on the top is for a rubber cord retraction of the spinnaker pole lift. When the pole is in stand-by position on the foredeck and you want the lift engaged but yet out of the way, a tensioned rubber cord will pull it aft and down. The lift has to be fed through a stainless ring at the end of the rubber cord.
Note - if the pole in stand-by position is blocking the forepeak hatch, remove the Nylon screw in the release trigger to enable instant disconnection of the pole in case of emergency.
8 Monel pop-rivets ø6,4x25 mm included (art no 167-063)
Order adaptor art no 534-782 separately.
Using a spinnaker is a thrill, although a little bit more challenging that most other type of sails. If you want to learn the basics on how to handle setting, dousing and gybing - read our booklet on this subject.
https://support.seldenmast.com/files/1378899451/595-560-E.pdf
Adaptor: 534-782
FL: 155.00 mm
TECHNICAL INFORMATION
TECHNICAL INFORMATION
| Description | Imperial | Metric |
|---|---|---|
| Weight | 1.91 lb. | 868.00 g. |