DESCRIPTION
DESCRIPTION
A female bayonet inboard end compatible with Seldén bayonet peak spinnaker pole cars. Push it on to the peak and a spring loaded release trigger will engage the pole to the car. When a pole is stored vertically by the means of a Vertical Pole Stowage system (VPS), we recommend that the release trigger is secured in locked position by tightening a Nylon screw inserted in the trigger.
A sheave at the lower part of the fitting is used for a Trip-trigger release line and a sheave on the top is for a rubber cord retraction of the spinnaker pole lift. When the pole is in stand-by position on the foredeck and you want the lift engaged but yet out of the way, a tensioned rubber cord will pull it aft and down. The lift has to be fed through a stainless ring at the end of the rubber cord.
Note - if the pole in stand-by position is blocking the forepeak hatch, remove the Nylon screw in the release trigger to enable instant disconnection of the pole in case of emergency.
12 M6 screws included.
Order adaptor art no 534-801 separately.
Using a spinnaker is a thrill, although a little bit more challenging that most other type of sails. If you want to learn the basics on how to handle setting, dousing and gybing - read our booklet on this subject.
https://support.seldenmast.com/files/1378899451/595-560-E.pdf
TECHNICAL INFORMATION
TECHNICAL INFORMATION
| Description | Imperial | Metric |
|---|---|---|
| Weight | 1.84 lb. | 836.00 g. |