A ratchet block holds most of a loaded sheet for you: the sheave spins freely as you trim and grips the line as you ease. Choose one by three things — the type of ratchet, the sheave size in mm, and the holding power, which Harken rates at 10:1, 15:1 or 20:1 at a full 180° wrap.
Ratchet blocks: the quick answers
What is a ratchet block and how does it work?
A ratchet block is a sailing block whose sheave spins freely when you trim and resists turning when you ease, so the block carries most of the load on a sheet and your hand holds the rest.
Switchable or automatic: which ratchet should I choose?
A switchable ratchet is turned on or off by the sailor with a switch. An automatic ratchet, such as the Harken Ratchamatic or Ronstan's Orbit RTA, runs free under low tension and engages by itself once the sheet loads up.
What size ratchet block do I need?
Match the sheave diameter to the load and the line, then pick the grip. The holding power comes from the grip option rather than the diameter: a 57 mm block is 10:1 in Standard grip and 20:1 in 2x grip. Within Standard grip it does rise with size, from 10:1 at 57 mm to 15:1 at 75 mm. We stock 40 mm, 57 mm, 75 mm and 76 mm Harken ratchets.
Does a 180-degree wrap really matter?
Yes, because it is the condition the rating is measured in. Harken quotes its holding power with a full 180° wrap under a 50 lb (23 kg) load, so less wrap than that means less grip than the number on the box.
What does HTE mean on a Harken ratchet block?
High-threshold engagement. The spring is stiffer than on the standard Ratchamatic, so the block keeps running free until a higher load, which is what lets an old kite sheet run out cleanly through a gybe.
What do Standard, 1.5x and 2x grip mean on a Power3 block?
They are Harken's three holding-power options: Standard is 10:1 for medium and light air, 1.5x is 15:1 for breeze and puffs, and 2x is 20:1 for steady big breeze. Our product names carry the colour too — Standard in black, 1.5x in titanium, 2x in silver.
Can a ratchet block replace a cleat?
No. It helps you hold and ease a loaded sheet but it does not lock the line. Use a cam cleat, or a ratchet with an integrated cam such as the Harken Block - Carbo 57mm Single - Ratchet - Swivel / 150 Cam-Matic (Black).
What this guide covers
- Ratchet vs Ratchamatic: switchable and automatic
- Power3, HTE and the grip levels
- Ratchet vs plain blocks: when you need holding power
- Ronstan Orbit Series 55
- Shackle or soft-attach
- How to choose a ratchet block in five steps
- Which ratchet block fits your boat
Ratchet blocks at a glance
| What you want | Grip | Sheave | Block |
|---|---|---|---|
| Simple switchable ratchet | Standard | 57 mm | Harken Block - 57mm Ratchet Block - Swivel (Black) |
| Automatic, light to medium air | Standard | 57 mm | Harken Block - Carbo Ratchamatic 57mm Single - Swivel / Standard Grip (Black) |
| Automatic, breeze and puffs | 1.5x | 57 mm | Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 1.5x Grip (Titanium) |
| Automatic, steady big breeze | 2x | 57 mm | Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 2x Grip (Silver) |
| Automatic, engages later | Standard HTE | 57 mm | Harken Block - Carbo HTE Ratchamatic 57mm Single - Standard Grip (Black) |
| Automatic on a bigger boat | 2x | 75 mm | Harken Block - Carbo Power3 Ratchamatic 75mm Single - Swivel / 2x Grip (Silver) |
| Smallest dinghy lead | Standard | 40 mm | Harken Block - Carbo 40mm Single - Ratchet - Swivel (Black) |
| Ratchet with a cam to park the line | Standard | 57 mm | Harken Block - Carbo 57mm Single - Ratchet - Swivel / 150 Cam-Matic (Black) |
How do switchable and automatic ratchets differ?
A switchable ratchet has a lever you set by hand: on, and the sheave grips when the line runs out; off, and it is an ordinary free-running block. You decide when you want the grip. The Harken Block - 57mm Ratchet Block - Swivel (Black) is the plain switchable version at 57 mm.
A Ratchamatic decides for itself. It rolls freely in both directions under low load and engages the ratchet as the load comes on, so it trims like a free block and holds like a ratchet without anyone touching a switch. Harken builds it at 57 mm and 75 mm:
- Harken Block - Carbo Ratchamatic 57mm Single - Swivel / Standard Grip (Black).
- Harken Block - Carbo Ratchamatic 75mm Single - Swivel / Standard Grip (Black).
Ronstan does the same thing with its Orbit blocks and spells the choice out in the part name: RTA is the automatic, RTM the manual.
- Ronstan Series 40 RTA OrbitBlock,Auto, Single, Swivel Head.
- Ronstan Series 40 RTM OrbitBlock,Manual, Single, Swivel.

What are Power3, HTE and the grip levels?
Power3 is Harken's multi-faceted sheave, sold in three holding-power options so the same block can be matched to the conditions. Standard grip is 10:1, 1.5x is 15:1 and 2x is 20:1, all measured at a full 180° wrap under a 50 lb (23 kg) load. The product names carry the grip and the colour:
- Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 1.5x Grip (Titanium) — 1.5x, for breeze and puffs.
- Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 2x Grip (Silver) — 2x, for steady big breeze.
- Harken Block - Carbo Power3 Ratchamatic 75mm Single - Swivel / 2x Grip (Silver) — 2x at 75 mm, for a bigger boat.
HTE stands for high-threshold engagement. It is the same Ratchamatic with a stiffer spring, so the block stays free-running until a higher load. On a spinnaker sheet that means the old sheet runs out cleanly through the gybe instead of snubbing. All three grips exist in HTE:
- Harken Block - Carbo HTE Ratchamatic 57mm Single - Standard Grip (Black).
- Harken Block - Carbo HTE Ratchamatic 57mm Single - 1.5x Grip (Titanium).
- Harken Block - Carbo HTE Ratchamatic 57mm Single - 2x Grip (Silver).
When do you actually need a ratchet instead of a plain block?
A plain block changes the direction of a line and nothing else. A ratchet block also holds it. The question is whether the sheet is loaded enough, and handled often enough, that your hand needs help:
- A mainsheet or spinnaker sheet you trim and ease constantly, and cannot cleat, is what ratchets are for.
- A control line you set and forget belongs on a plain block with a cleat.
- A line that must be released instantly under load wants a ratchet rather than a cleat, because a ratchet never locks.
Ratchets are not a Harken-only idea. We carry them from five makers, and the smaller boats are well served by the simpler ones:
- Barton Marine Ratchet Block - 55mm.
- Selden 45 Ball Bearing Block - Automatic Ratchet.
- Lewmar 80mm Single Ratchet Block.
- Lewmar 60mm Triple Ratchet w/Becket & Cam.
How does the Ronstan Orbit Series 55 compare?
Ronstan's Orbit ratchets are its answer to the same problem, built around the Orbit sheave. The Series 55 is the mid-size one, close to Harken's 57 mm in application, and it is sold with a plain swivel head or with a cleat built in:
- Ronstan Series 55 RT Orbit Block, Single Swivel Head.
- Ronstan Series 55 RT Orbit Block, Single Cleat Swivel, Auto.
Above and below it, Ronstan's pivoting low-lead ratchets with a cleat cover the bigger sheets:
- Ronstan Series 60 Ratchet, Pivoting Low Lead, Cleat.
- Ronstan Series 75 Ratchet, Pivoting Low Lead, Cleat.

Shackle or soft-attach: which attachment do I want?
How the block hangs matters as much as the sheave. A swivel shackle head is the default and takes a shackle or a strop. A T2 soft-attach head replaces the metal head with a lashing, which is lighter and will not bruise the deck or the boom when the sheet goes slack.
- Harken Block - Carbo T2 Ratchamatic 57mm Single - Standard Grip (Black) — soft-attach at 57 mm.
- Harken Block - Carbo T2 Ratchamatic 40mm Single - Standard Grip (Black) — soft-attach at 40 mm, for dinghies.
- Harken Block - Carbo Power3 T2 Ratchamatic 57mm Single - 2x Grip (Silver) — soft-attach with the 2x Power3 sheave.
Two more head styles are worth knowing. A Flip-Flop head lets the block lie either way up so the sheet leads cleanly on both tacks, and the Classic HexaRatchet is the older side-plate design still used on small boats and midrange sheets:
- Harken Block - Carbo Flip-Flop Ratchamatic 57mm Single - Standard Grip (Black).
- Harken Block - Carbo Flip-Flop Ratchamatic 57mm Single - 150 Cam-Matic / Standard Grip (Black).
- Harken Block - Classic Small Boat HexaRatchet 57mm Single (Starboard) and Harken Block - Classic Small Boat HexaRatchet 57mm Single (Port) — handed, so order the side you need.
- Harken Block - Classic Midrange HexaRatchet 76mm Single.
- Harken Block - Classic Midrange HexaRatchet 76mm Single - Fiddle - 280 Cam-Matic.
How to choose a ratchet block in five steps
- Decide whether the line needs a ratchet at all. A mainsheet or spinnaker sheet you trim and ease constantly, and cannot cleat, is what ratchets are for. A control line you set and forget belongs on a plain block with a cleat.
- Choose switchable or automatic. A switchable ratchet has a lever you set by hand. An automatic one, such as the Harken Ratchamatic or Ronstan's Orbit RTA, runs free under low tension and engages by itself as the load comes on.
- Pick the grip. Harken rates Standard at 10:1 for medium and light air, 1.5x at 15:1 for breeze and puffs, and 2x at 20:1 for steady big breeze, all at a full 180° wrap under a 50 lb (23 kg) load.
- Match the sheave size to the load and the line. The holding power comes from the grip option rather than the diameter. We stock 40 mm, 57 mm, 75 mm and 76 mm Harken ratchets.
- Choose the attachment, and add a cam if the sheet has to be parked. A swivel shackle head is the default; a T2 soft-attach head is lighter. A ratchet does not lock the line, so for a sheet you need to hold, pick a ratchet with an integrated cam or use a cam cleat.
Which ratchet block fits your boat?
- Dinghy jib or spinnaker sheet. Start at 40 mm: Harken Block - Carbo 40mm Single - Ratchet - Swivel (Black), or Harken Block - Carbo 40mm Single - Ratchet - Swivel / 471 Carbo-Cam (Black) if you want a cam on the block.
- Dinghy mainsheet. 57 mm, switchable or automatic: Harken Block - 57mm Ratchet Block - Swivel (Black) or Harken Block - Carbo Ratchamatic 57mm Single - Swivel / Standard Grip (Black).
- Racing, wind that changes. Power3 so you can pick the grip: Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 1.5x Grip (Titanium) or Harken Block - Carbo Power3 Ratchamatic 57mm Single - Swivel / 2x Grip (Silver).
- Spinnaker sheet on a bigger boat. 75 mm: Harken Block - Carbo Ratchamatic 75mm Single - Swivel / Standard Grip (Black) or Harken Block - Carbo Power3 Ratchamatic 75mm Single - Swivel / 2x Grip (Silver).
- Keelboat sheet that has to be parked. A ratchet with a cam: Harken Block - Carbo Flip-Flop Ratchamatic 57mm Single - 150 Cam-Matic / Standard Grip (Black), or the Ronstan Series 60 Ratchet, Pivoting Low Lead, Cleat.
The full ranges are in Harken Ratchet Blocks and Sailboat Ratchet Blocks, which is where the Ronstan, Lewmar, Selden and Barton Marine ratchets live.
Frequently asked questions
How do I service a ratchet block?
Rinse it with fresh water and let it drain. The Carbo ratchets have sealed bearings and a sprung pawl, so there is nothing to grease; if the pawl stops clicking, the block is due for replacement rather than repair.
How do I know which way round to fit a handed ratchet?
The Classic Small Boat HexaRatchet is sold as a starboard part and a port part, and the ratchet only grips in one direction. Fit the side that grips as the sheet runs out, which is why we list both the starboard and the port version.
How does a ratchet block behave when I ease fast?
It slips in a controlled way rather than locking, which is the point: you can dump a loaded sheet with the block still taking most of the tension. A cam cleat cannot do that.
How do I choose between a 57 mm and a 75 mm block?
By the line and the load, not by the boat length alone. The 75 mm sheave suits a thicker spinnaker sheet and gives more grip in Standard form, 15:1 against 10:1 at 57 mm, so it is the usual step up when the 57 mm starts slipping.
How do soft-attach blocks mount?
With a lashing through the head instead of a shackle, so you need a short length of Dyneema or similar and a hard point to tie to. The advantage is weight and no metal swinging against the deck.
Last updated: October 26, 2026.
