How to Choose the Right Line for Your Sailboat by Boat Length and Use

Premium Ropes Cruiser XTS double-braid line diameter and color range, 3 mm to 18 mm

Which line you need for your sailboat depends on your boat length and how you use the line: sheet, halyard, control line or furling line. This selection guide starts from Premium Ropes' chart below (a 36 ft boat, for example, typically runs 12 mm sheets and 10 to 12 mm halyards), then checks the result against the diameter range printed on your clutches and blocks. Premium Ropes' own rule: the optimal diameter is usually 1 to 2 mm smaller than the maximum your block or clutch is built for.

This guide covers three decisions in order: diameter, length, and the lines that are sized differently (furling, mooring and anchoring). Diameters and length formulas come from Premium Ropes, the manufacturer of the Cruiser XTS double-braid lines we stock, and every size links to a line we carry. For breaking-strength data and the hardware-first method, see our rope diameter and length guide.

Line diameter by boat length at a glance

Premium Ropes Cruiser XTS Solid 10 mm (3/8 in) polyester double braid
Cruiser XTS Solid de 10 mm (3/8 in): el diametro que cubre escotas y drizas en la mayoria de los barcos de 28 a 36 ft.
Boat length Main sheet Genoa sheet Spinnaker sheet Main halyard Genoa halyard Spinnaker halyard
6-8 m / 20-26 ft 10 mm 10 mm 8 mm 8 mm 8 mm 8 mm
9 m / 30 ft 10 mm 12 mm 10 mm 10 mm 10 mm 8 mm
10 m / 33 ft 12 mm 12 mm 10 mm 10 mm 10 mm 10 mm
11 m / 36 ft 12 mm 12 mm 12 mm 10 mm 12 mm 10 mm
12 m / 40 ft 12 mm 14 mm 12 mm 12 mm 12 mm 12 mm
14 m / 46 ft 14 mm 14 mm 12 mm 12 mm 12 mm 12 mm
16 m / 53 ft 14 mm 14 mm 14 mm 12 mm 14 mm 12 mm
18 m / 59 ft 14 mm 14 mm 14 mm 14 mm 14 mm 14 mm

Diameters are Premium Ropes' recommendations for sheets and halyards by yacht length. They are practical guidelines, so your hardware's stated range always comes first.

What diameter line do I need for my sailboat?

Find your boat length in the first column, then read across by job. A 30 ft boat, for example, uses a 10 mm main sheet, a 12 mm genoa sheet, a 10 mm spinnaker sheet, 10 mm main and genoa halyards and an 8 mm spinnaker halyard. If your boat falls between two rows, check both rows against the range on your clutches and blocks before you order.

We stock the diameters used in this chart in Cruiser XTS polyester double braid:

Other cover styles in the same diameters are in the Cruising lines collection.

According to Premium Ropes, lines with high-performance fibers such as Dyneema, Vectran or Stirotex allow roughly 2 mm smaller diameters while keeping the required breaking load. Our Stirotex and Dyneema core lines are in the Racing lines collection.

How do I check the diameter against my clutches and blocks?

Read the maximum diameter printed on the clutch, cam cleat or block, then choose a line 1 to 2 mm below it. The range on the hardware is the hard limit, so confirm it before you order. Two worked examples: Will a 3/8 line work in a Lewmar DC2 clutch? and What's the difference between a Lewmar DC1 and DC2 rope clutch?

How much line do I need?

Premium Ropes gives these rules of thumb for sailing yachts, and says the most accurate method is to measure your old ropes before replacing them. We sell line by the foot, so convert your result to feet (1 m is about 3.28 ft) and order the total. Splices are not included. Line cut to length cannot be returned, so measure twice before you order (see our refund policy). In the mainsheet and traveller formulas, purchase is the ratio of the block system (4 for a 4:1).

Halyards

Line Length
Main halyard Mast length x 2.5
Genoa or Yankee halyard Mast length x 2.5 (fractional rig: mast length x 2)
Spinnaker or gennaker halyard Mast length x 2.5
Topping lift Mast length x 2.5 (fractional rig: mast length x 2)

Sheets

Line Length
Mainsheet Boom length x (purchase + 1)
Genoa sheet Boat length x 1 to 1.5
Yankee sheet Boat length x 1.5 to 2
Spinnaker guy or tack line Boat length x 1.5 to 2
Spinnaker or gennaker sheet Boat length x 2 to 2.5

Control lines

Line Length
Outhaul Boom length x 2
Boom vang Boom length x 2
Cunningham Boom length x 1
Genoa lead Rail length x (purchase + 1)
Traveller Rail length x (purchase + 1)
Spinnaker pole topping lift Mast length x 2
Spinnaker pole downhaul Boat length x 1.5
Reefing line, reef 1 Boom length x 2.5
Reefing line, reef 2 Boom length x 3
Preventer Boat length x 1.5

What line do I need for furling, mooring and anchoring?

  • Headsail furling line: boat length + foot length. The diameter is set by your furler drum, not by boat length, so use our furling line guide and the furling lines collection.
  • Mooring lines: boat length x 1.5. Premium Ropes suggests carrying at least two lines of 1.5 times the boat length and two of one boat length, and protecting them with a chafe sleeve or stainless thimble at critical points. See our dock lines.
  • Anchor rode: maximum water depth x 5. See our anchor lines.

When should I ask a rigger?

Premium Ropes calls its chart practical guidelines. For safety-critical applications, or if your boat is significantly heavier than average, it recommends consulting a professional rigger to confirm the diameter for your setup.

Premium Ropes Cruiser XTS Solid 14 mm (9/16 in) polyester double braid
Cruiser XTS Solid de 14 mm (9/16 in), para las escotas de genova de barcos mayores.

Frequently asked questions

What size sheets and halyards do I need for a 36 ft sailboat?

Per Premium Ropes' chart for an 11 m / 36 ft boat: 12 mm main, genoa and spinnaker sheets; a 10 mm main halyard, a 12 mm genoa halyard and a 10 mm spinnaker halyard. Confirm each size against the range on your clutches and blocks.

Can I use a thinner line than the chart recommends?

Premium Ropes says lines with Dyneema, Vectran or Stirotex cores allow approximately 2 mm smaller diameters while keeping the required breaking load. The thinner line still has to fit your clutches and blocks.

How much line do I need for a main halyard?

Premium Ropes' rule of thumb is mast length x 2.5. If you still have the old halyard, measuring it is the most accurate method.

How long should a mooring line be?

Boat length x 1.5. Premium Ropes suggests carrying at least two lines of that length and two of one boat length.

How do I size a furling line?

Length is boat length + foot length. Diameter depends on your furler drum; our furling line guide lists it by furler model.

Shop Cruising lines | Shop Racing lines

You may also be interested in

Written by the MAURIPRO Rigging Team. Diameters and length formulas: Premium Ropes rope advice (rope diameter and rope length). Last updated 2026-10-09.

Leave a comment

Please note: comments must be approved before they are published.