Lofrans Super Ercole Horizontal Windlass — Installation & User's Manual (Part 2 of 2)
INSTALLATION MANUAL
Performance data, gipsy and chain match, cable sizing, deck installation, operation, maintenance schedule, troubleshooting and the full parts lists (models A, B and C) for the Lofrans Super Ercole horizontal windlass, with its deck template.
DocumentLofrans Super Ercole Horizontal Windlass Installation & User's Manual
FormatPDF · 50 pages · 4.8 MB
LanguageEnglish
Download PDF ▾
This manual is split into 2 pages: Part 1 → · Part 2
Spare Parts
Three drawings: Super Ercole A (B.15.101), B (B.15.102) and C (B.15.103), all Rev. C, 11-2007. Item numbers are drawing references; only the kits carry Lofrans codes, and the lists give the KA/KB/KC/KD13101 kits for all three models (as printed). Model B lists most gipsy and brake parts twice (two gipsies).
Service Kits
| Kit code | Description | |
|---|---|---|
| KA13101 | Kit A – Seals | Ask us to source it → |
| KB13101 | Kit B – Screws & nuts | Ask us to source it → |
| KC13101 | Kit C – Keys | Ask us to source it → |
| KD13101 | Kit D – Circlips | Ask us to source it → |
Super Ercole A (B.15.101)
| Item | Description | Kit |
|---|---|---|
| 226 | Washer for screw M8 | Kit B |
| 227 | Nut – M8 | Kit B |
| 231 | Washer for screw M5 | Kit B |
| 250 | Hd cap screw – M5×8 | Kit B |
| 260 | Spring washer for screw M8 | Kit B |
| 342 | Spring | – |
| 351 | Hd cap screw – M6×20 | Kit B |
| 369 | Washer for screw M10 | Kit B |
| 381 | Key – 8×7×40 | Kit C |
| 385 | Hex hd screw – M10×30 | Kit B |
| 391 | Nut – M10 | Kit B |
| 392 | Hex hd screw – M8×25 | Kit B |
| 400 | Circlip – 15 DIN 471 | Kit D |
| 401 | Pivot | – |
| 402 | Hex hd screw – M6×16 | Kit B |
| 403 | Spring | – |
| 412 | O-ring seal – 153 | Kit A |
| 415 | Nut – M12 | Kit B |
| 460 | Hex hd screw – M10×20 | Kit B |
| 569 | Chromed bronze drum | – |
| 573a | Nylon band | – |
| 573b | Nylon bush | – |
| 574a | Gipsy chain 10 ISO | – |
| 574b | Gipsy chain 12 ISO – 13 DIN 766 | – |
| 574c | Gipsy chain 1/2" HT | – |
| 574d | Gipsy chain 14 ISO | – |
| 574e | Gipsy chain 16 ISO | – |
| 574f | Gipsy chain 16 DIN 766 | – |
| 574g | Gipsy chain 1/2" TR | – |
| 574h | Gipsy chain 14 TR | – |
| 574i | Gipsy chain 13 Italmet | – |
| 574l | Gipsy chain 13 DIN 764 | – |
| 574m | Gipsy chain 16 TR | – |
| 574n | Gipsy chain 18 ISO | – |
| 574o | Gipsy chain 18 TR | – |
| 574p | Gipsy chain 19 TR | – |
| 574q | Gipsy chain 20 ISO | – |
| 574r | Gipsy chain 20 TR | – |
| 574s | Gipsy chain 18 DIN 766 | – |
| 576 | Pivot | – |
| 577 | Spring | – |
| 579 | Hand-wheel | – |
| 580 | Washer for screw M12 | Kit B |
| 581 | Safety nut – M12 | Kit B |
| 596 | Cap nut – M10 | Kit B |
| 608 | Key – 12×8×90 | Kit C |
| 611 | Key – 16×10×60 | Kit C |
| 619 | Hd cap screw – M6×10 | Kit B |
| 626 | Sightglass | – |
| 637 | Key – 8×7×30 | Kit C |
| 640 | Electric motor 3500 W 24 V | – |
| 641a | Electric motor A.C. ph 1 V 220 kW 5 Hz 50/60 (as printed) | – |
| 641b | Electric motor A.C. ph 3 V 380 kW 4 Hz 50/60 (as printed) | – |
| 642 | Brake cover | – |
| 692 | Wingnut | – |
| 706 | Nylon band | – |
| 707 | Emergency wheel | – |
| 714 | Bearing – 6205 | – |
| 719 | Nylon washer for screw M10 | Kit B |
| 728 | Chain pipe | – |
| 729 | Stripper | – |
| 730 | Conic hd screw – M10×30 | Kit B |
| 731 | Brake pivot | – |
| 733 | Handle | – |
| 736 | Dog clutch | – |
| 740 | Washer | Kit B |
| 741 | Key – 12×8×150 | Kit C |
| 744 | Pawl | – |
| 745 | Brake pivot | – |
| 746 | Stud – M8×55 | – |
| 748 | Clutch cone – outer | – |
| 749 | Band brake | – |
| 750 | Clutch cone – inner | – |
| 752 | O-ring seal – 6212 | Kit A |
| 753 | Seal – 85×110×12 | Kit A |
| 754 | Rack | – |
| 755 | Gasket | – |
| 756 | Body | – |
| 757 | Sightglass flange | – |
| 758 | Oil plug 3/4" | – |
| 759 | Ring | – |
| 762 | Bearing – 6017 | – |
| 763 | Circlip – 20 DIN 471 | Kit D |
| 764 | Pivot | – |
| 765 | Bush | – |
| 766 | Gear | – |
| 767 | Gear flange | – |
| 769 | Key – 18×11×70 | Kit C |
| 770 | Circlip – 95 DIN 471 | Kit D |
| 771 | Pivot | – |
| 772 | Wormwheel | – |
| 773 | Ratchet wheel | – |
| 774 | Thrust ring – CP 7095 | – |
| 775 | Thrust bearing – AX 7095 | – |
| 776 | Bevel gear | – |
| 777 | Bearing – 6212 | – |
| 790 | Worm | – |
| 791 | Thrust bearing – 51109 | – |
| 792 | Spacer | – |
| 793 | Stud – M10×538 | – |
| 794 | Gasket | – |
| 795 | Motor cover | – |
| 796 | Hd cap screw – M8×20 | Kit B |
| 797 | Hd cap screw – M6×16 | Kit B |
| 798 | Gasket | – |
| 799 | Cover | – |
| 800 | Seal – 72×105×13 | Kit A |
| 801 | O-ring seal – 150 | Kit A |
| 802 | Spacer | – |
| 803 | Main shaft | – |
| 832 | Seal – 45×72×10 | Kit A |
| 1004 | Washer | – |
| 1173 | Circlip – 110 DIN 472 | Kit D |
Super Ercole B (B.15.102)
| Item | Description | Kit |
|---|---|---|
| 226 | Washer for screw M8 | Kit B |
| 227 | Nut – M8 | Kit B |
| 231 | Washer for screw M5 | Kit B |
| 250 | Hd cap screw – M5×8 | Kit B |
| 260 | Spring washer for screw M8 | Kit B |
| 342 | Spring | – |
| 351 | Hd cap screw – M6×20 | Kit B |
| 369 | Washer for screw M10 | Kit B |
| 381 | Key – 8×7×40 | Kit C |
| 385 | Hex hd screw – M10×30 | Kit B |
| 391 | Nut – M10 | Kit B |
| 392 | Hex hd screw – M8×25 | Kit B |
| 400 | Circlip – 15 DIN 471 | Kit D |
| 401 | Pivot | – |
| 402 | Hex hd screw – M6×16 | Kit B |
| 403 | Spring | – |
| 412 | O-ring seal – 153 | Kit A |
| 415 | Nut – M12 | Kit B |
| 487 | O-ring seal – 4143 | Kit A |
| 573a | Nylon band | – |
| 573b | Nylon bush | – |
| 574a | Gipsy chain 10 ISO | – |
| 574b | Gipsy chain 12 ISO – 13 DIN 766 | – |
| 574c | Gipsy chain 1/2" HT | – |
| 574d | Gipsy chain 14 ISO | – |
| 574e | Gipsy chain 16 ISO | – |
| 574f | Gipsy chain 16 DIN 766 | – |
| 574g | Gipsy chain 1/2" TR | – |
| 574h | Gipsy chain 14 TR | – |
| 574i | Gipsy chain 13 Italmet | – |
| 574l | Gipsy chain 13 DIN 764 | – |
| 574m | Gipsy chain 16 TR | – |
| 574n | Gipsy chain 18 ISO | – |
| 574o | Gipsy chain 18 TR | – |
| 574p | Gipsy chain 19 TR | – |
| 574q | Gipsy chain 20 ISO | – |
| 574r | Gipsy chain 20 TR | – |
| 574s | Gipsy chain 18 DIN 766 | – |
| 576 | Pivot | – |
| 577 | Spring | – |
| 579 | Hand-wheel | – |
| 580 | Washer for screw M12 | Kit B |
| 581 | Safety nut – M12 | Kit B |
| 596 | Cap nut – M10 | Kit B |
| 608 | Key – 12×8×90 | Kit C |
| 609 | Key – 12×8×60 | Kit C |
| 611 | Key – 16×10×60 | Kit C |
| 619 | Hd cap screw – M6×10 | Kit B |
| 626 | Sightglass | – |
| 637 | Key – 8×7×30 | Kit C |
| 640 | Electric motor 3500 W 24 V | – |
| 641a | Electric motor A.C. ph 1 V 220 kW 5 Hz 50/60 (as printed) | – |
| 641b | Electric motor A.C. ph 3 V 380 kW 4 Hz 50/60 (as printed) | – |
| 642 | Brake cover | – |
| 692 | Wingnut | – |
| 706 | Nylon band | – |
| 707 | Emergency wheel | – |
| 714 | Bearing – 6205 | – |
| 719 | Nylon washer for screw M10 | Kit B |
| 728 | Chain pipe | – |
| 729 | Stripper | – |
| 730 | Conic hd screw – M10×30 | Kit B |
| 731 | Brake pivot | – |
| 733 | Handle | – |
| 735 | Spacer | – |
| 736 | Dog clutch | – |
| 740 | Washer | Kit B |
| 744 | Pawl | – |
| 746 | Stud – M8×55 | – |
| 748 | Clutch cone – outer | – |
| 749 | Band brake | – |
| 750 | Clutch cone – inner | – |
| 751 | Brake pivot | – |
| 752 | O-ring seal – 6212 | Kit A |
| 753 | Seal – 85×110×12 | Kit A |
| 754 | Rack | – |
| 755 | Gasket | – |
| 756 | Body | – |
| 757 | Sightglass flange | – |
| 758 | Oil plug 3/4" | – |
| 759 | Ring | – |
| 760 | Clutch cone – inner | – |
| 761 | Clutch cone – outer | – |
| 762 | Bearing – 6017 | – |
| 763 | Circlip – 20 DIN 471 | Kit D |
| 764 | Pivot | – |
| 765 | Bush | – |
| 766 | Gear | – |
| 767 | Gear flange | – |
| 768 | Main shaft | – |
| 769 | Key – 18×11×70 | Kit C |
| 770 | Circlip – 95 DIN 471 | Kit D |
| 771 | Pivot | – |
| 772 | Wormwheel | – |
| 773 | Ratchet wheel | – |
| 774 | Thrust ring – CP 7095 | – |
| 775 | Thrust bearing – AX 7095 | – |
| 776 | Bevel gear | – |
| 777 | Bearing – 6212 | – |
| 778 | Key – 10×8×30 | Kit C |
| 779 | Key – 10×8×80 | Kit C |
| 780 | Shaft | – |
| 781 | Bevel gear | – |
| 782 | Circlip – 75 DIN 472 | Kit D |
| 783 | Bearing – 6009 | – |
| 784 | Spacer | – |
| 785 | Gasket | – |
| 786 | Cover | – |
| 787 | Spacer | – |
| 788 | Seal – 58×72×9 | Kit A |
| 789 | Chromed bronze drum | – |
| 790 | Worm | – |
| 791 | Thrust bearing – 51109 | – |
| 792 | Spacer | – |
| 793 | Stud – M10×403 | – |
| 794 | Gasket | – |
| 795 | Motor cover | – |
| 796 | Hd cap screw – M8×20 | Kit B |
| 797 | Hd cap screw – M6×16 | Kit B |
| 832 | Seal – 45×72×10 | Kit A |
| 1173 | Circlip – 110 DIN 472 | Kit D |
Super Ercole C (B.15.103)
| Item | Description | Kit |
|---|---|---|
| 226 | Washer for screw M8 | Kit B |
| 227 | Nut – M8 | Kit B |
| 231 | Washer for screw M5 | Kit B |
| 250 | Hd cap screw – M5×8 | Kit B |
| 260 | Spring washer for screw M8 | Kit B |
| 342 | Spring | – |
| 351 | Hd cap screw – M6×20 | Kit B |
| 369 | Washer for screw M10 | Kit B |
| 381 | Key – 8×7×40 | Kit C |
| 385 | Hex hd screw – M10×30 | Kit B |
| 391 | Nut – M10 | Kit B |
| 392 | Hex hd screw – M8×25 | Kit B |
| 400 | Circlip – 15 DIN 471 | Kit D |
| 401 | Pivot | – |
| 402 | Hex hd screw – M6×16 | Kit B |
| 403 | Spring | – |
| 412 | O-ring seal – 153 | Kit A |
| 415 | Nut – M12 | Kit B |
| 460 | Hex hd screw – M10×20 | Kit B |
| 487 | O-ring seal – 4143 | Kit A |
| 569 | Chromed bronze drum | – |
| 573a | Nylon band | – |
| 573b | Nylon bush | – |
| 574a | Gipsy chain 10 ISO | – |
| 574b | Gipsy chain 12 ISO – 13 DIN 766 | – |
| 574c | Gipsy chain 1/2" HT | – |
| 574d | Gipsy chain 14 ISO | – |
| 574e | Gipsy chain 16 ISO | – |
| 574f | Gipsy chain 16 DIN 766 | – |
| 574g | Gipsy chain 1/2" TR | – |
| 574h | Gipsy chain 14 TR | – |
| 574i | Gipsy chain 13 Italmet | – |
| 574l | Gipsy chain 13 DIN 764 | – |
| 574m | Gipsy chain 16 TR | – |
| 574n | Gipsy chain 18 ISO | – |
| 574o | Gipsy chain 18 TR | – |
| 574p | Gipsy chain 19 TR | – |
| 574q | Gipsy chain 20 ISO | – |
| 574r | Gipsy chain 20 TR | – |
| 574s | Gipsy chain 18 DIN 766 | – |
| 576 | Pivot | – |
| 577 | Spring | – |
| 579 | Hand-wheel | – |
| 580 | Washer for screw M12 | Kit B |
| 581 | Safety nut – M12 | Kit B |
| 596 | Cap nut – M10 | Kit B |
| 608 | Key – 12×8×90 | Kit C |
| 611 | Key – 16×10×60 | Kit C |
| 619 | Hd cap screw – M6×10 | Kit B |
| 626 | Sightglass | – |
| 637 | Key – 8×7×30 | Kit C |
| 640 | Electric motor 3500 W 24 V | – |
| 641a | Electric motor A.C. ph 1 V 220 kW 5 Hz 50/60 (as printed) | – |
| 641b | Electric motor A.C. ph 3 V 380 kW 4 Hz 50/60 (as printed) | – |
| 642 | Brake cover | – |
| 692 | Wingnut | – |
| 706 | Nylon band | – |
| 707 | Emergency wheel | – |
| 714 | Bearing – 6205 | – |
| 719 | Nylon washer for screw M10 | Kit B |
| 728 | Chain pipe | – |
| 729 | Stripper | – |
| 730 | Conic hd screw – M10×30 | Kit B |
| 731 | Brake pivot | – |
| 733 | Handle | – |
| 736 | Dog clutch | – |
| 740 | Washer | Kit B |
| 741 | Key – 12×8×150 | Kit C |
| 744 | Pawl | – |
| 745 | Brake pivot | – |
| 746 | Stud – M8×55 | – |
| 748 | Clutch cone – outer | – |
| 749 | Band brake | – |
| 750 | Clutch cone – inner | – |
| 752 | O-ring seal – 6212 | Kit A |
| 753 | Seal – 85×110×12 | Kit A |
| 754 | Rack | – |
| 755 | Gasket | – |
| 756 | Body | – |
| 757 | Sightglass flange | – |
| 758 | Oil plug 3/4" | – |
| 759 | Ring | – |
| 762 | Bearing – 6017 | – |
| 763 | Circlip – 20 DIN 471 | Kit D |
| 764 | Pivot | – |
| 765 | Bush | – |
| 766 | Gear | – |
| 767 | Gear flange | – |
| 769 | Key – 18×11×70 | Kit C |
| 770 | Circlip – 95 DIN 471 | Kit D |
| 771 | Pivot | – |
| 772 | Wormwheel | – |
| 773 | Ratchet wheel | – |
| 774 | Thrust ring – CP 7095 | – |
| 775 | Thrust bearing – AX 7095 | – |
| 776 | Bevel gear | – |
| 777 | Bearing – 6212 | – |
| 778 | Key – 10×8×30 | Kit C |
| 779 | Key – 10×8×80 | Kit C |
| 780 | Shaft | – |
| 781 | Bevel gear | – |
| 782 | Circlip – 75 DIN 472 | Kit D |
| 783 | Bearing – 6009 | – |
| 784 | Spacer | – |
| 785 | Gasket | – |
| 786 | Cover | – |
| 787 | Spacer | – |
| 788 | Seal – 58×72×9 | Kit A |
| 789 | Chromed bronze drum | – |
| 790 | Worm | – |
| 791 | Thrust bearing – 51109 | – |
| 792 | Spacer | – |
| 793 | Stud – M10×403 | – |
| 794 | Gasket | – |
| 795 | Motor cover | – |
| 796 | Hd cap screw – M8×20 | Kit B |
| 797 | Hd cap screw – M6×16 | Kit B |
| 800 | Seal – 72×105×13 | Kit A |
| 801 | O-ring seal – 150 | Kit A |
| 802 | Spacer | – |
| 803 | Main shaft | – |
| 832 | Seal – 45×72×10 | Kit A |
| 1004 | Washer | – |
| 1173 | Circlip – 110 DIN 472 | Kit D |
Need a part that isn't listed? Ask us to source it and quote the part number from the PDF.
Products in this Manual
