DESCRIPTION

The original wire for Furlex 400S/E and TD. 1x19 strands, AISI 316 stainless steel The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit

FEATURES

  • The newer Furlex models, of the 4th generation, has a purpose made top-guard and do not need the roller.
  • Our recommendation is that the forestay wire is replaced after 20000 nautical miles.

TECHNICAL INFORMATION


DescriptionImperialMetric
Weight46.03 lb.20.88 kg.

KNOWLEDGE BASE

Selden Furlex 400TD — Owner's ManualAssembly and operating manual plus the full spare parts list for the Selden Furlex 400TD through-deck jib furler.View Manual →
Selden Furlex 400S & 500S — Owner's ManualAssembly and operating manual plus the full spare parts list for the Selden Furlex 400S and 500S jib furlers, with the.View Manual →
Selden Furlex 100S, 200S, 300S, 400S & 500S — Selection GuideOrdering data for the previous Furlex generation: 100S (up to approx. 30 ft) and 200S-500S (approx. 30-70 ft), with.View Selection Guide →