The Ronstan Series 100 Lashing Orbit Block (RF109109A) is a single-sheave, 100 mm (4 in) Orbit block for lines up to 16 mm (5/8 in), with a maximum working load of 5,500 kg (12,127.5 lb) and a breaking load of 13,750 kg (30,318.75 lb). Ronstan lists the Series 100 for primary mainsheet, halyard and spinnaker systems on boats to 16 m (53 ft), so this is a big-boat, high-load block, not a light furling-line block.
Ronstan Series 100 Lashing Orbit Block at a glance
| Specification | Ronstan RF109109A |
|---|---|
| Sheave diameter | 100 mm (4 in) |
| Maximum rope | 16 mm (5/8 in) |
| Maximum working load | 5,500 kg (12,127.5 lb) |
| Breaking load | 13,750 kg (30,318.75 lb) |
| Weight | 450 g (15.87 oz) |
| Cheek plates | Fully machined alloy |
| Bearings | Torlon needle rollers and captive Torlon ball bearings |
What is the Ronstan Series 100 Lashing Orbit Block?
Orbit is Ronstan's range of high-performance blocks. The side cheeks, head structure and hub of each block are machined as a single part from solid alloy, leaving material only where it carries load and removing the need for extra fasteners. The sheave runs on captive ball bearings that take the side-thrust loads, so the block needs no side retainer plates. That saves weight and leaves a wider bearing surface for longer Torlon needles, which is where the strength-to-weight ratio comes from.
The Series 100 is one of the larger blocks in that range, and RF109109A is the lashing version: the “Lashing” in the name refers to its head fitting, which is meant to be attached by lashing rather than by a shackle. Use Ronstan's fitting instructions for the lashing method, and remember that the 5,500 kg rating belongs to the block: the lashing and the deck fitting it ties to have to be rated for the same load.
Where does the Series 100 belong on a boat?
Ronstan's own application list for the Series 100 is:
- Primary mainsheet, halyard and spinnaker systems on boats to 16 m (53 ft)
- Secondary mainsheet and vang blocks on boats to 18 m (60 ft)
- Backstay systems on boats to 14 m (46 ft)
- General control line and lead block applications on larger yachts
Those are the positions where a 16 mm line and a 5,500 kg working load make sense. On a 30–45 ft cruiser the loads in a furling line or a light control line are far below that, so a smaller Orbit block is the closer match.
How do I choose between the Series 100 and a smaller Orbit block?
Choose by the line first, then by the load. The Series 100 takes lines up to 16 mm; if your line is thinner and your loads are moderate, a block with a smaller sheave runs the line more naturally and weighs less. Ronstan's Series 40 Orbit blocks, for example, are rated from 400 kg up to 1,000 kg for the high-load versions. Our guide How to Choose Ronstan Series 40 Orbit Blocks covers that range.
Then compare the load you expect against the maximum working load, not the breaking load. For the RF109109A the breaking load is 2.5 times the 5,500 kg working load, which is the margin the working-load rating already builds in.
What is the Series 100 made of, and how does it turn?
Ronstan lists fully machined alloy cheek plates and alloy sheaves with captive ball races. The bearings are Torlon needle rollers with Torlon ball bearings on the Series 100, 125 and 150. Ronstan's stated benefits are the highest strength-to-weight ratio in its range, minimal friction loss at high loads, and a simple construction that makes maintenance and servicing straightforward.
For how the two-stage bearing system works across the Orbit family, see How to Understand Ronstan Orbit Block Technology.
Frequently asked questions
What line size is the Ronstan Series 100 Lashing Orbit Block rated for?
The RF109109A takes rope up to 16 mm (5/8 in), on a 100 mm (4 in) sheave.
What is the working load of the RF109109A?
The maximum working load is 5,500 kg (12,127.5 lb), and the breaking load is 13,750 kg (30,318.75 lb).
Is the Series 100 a furling-line block?
Ronstan lists it for primary mainsheet, halyard and spinnaker systems on boats to 16 m (53 ft), secondary mainsheet and vang blocks, backstay systems and general control-line and lead-block use on larger yachts. A furling line on a mid-size cruiser carries far less load, so a smaller Orbit block, such as the Series 40, is usually the closer match.
What bearings does the Series 100 use?
Torlon needle rollers, with captive Torlon ball bearings for the side-thrust loads on the Series 100, 125 and 150.
How much does the RF109109A weigh?
450 g (15.87 oz).
How do I attach a lashing Orbit block?
The “Lashing” version is attached by lashing rather than by a shackle. Follow Ronstan's fitting instructions for the lashing, and make sure both the lashing and the fitting it ties to are rated for the load the block will see.
Shop all Ronstan Blocks - Orbit Blocks →
You may also be interested in
- How to Choose Ratchet Blocks: Types, Sizes and Holding Power
- How to Choose Ronstan Series 40 Orbit Blocks
- How to Understand Ronstan Orbit Block Technology
Last updated: October 22, 2026.
