Harken mainsheet systems — self-contained two-speed 3:1 / 6:1 and 4:1 / 8:1 systems, double fiddle and cross blocks, Hexa-Cat bases with a 150 Cam-Matic cleat, and ceramic-bearing catamaran systems. Click here to read more.

View as

Harken Mainsheet Systems: Two-Speed Systems, Fiddle and Cross Blocks, Hexa-Cat Bases and Catamaran Systems

A mainsheet system is the purchase that lets you trim the mainsail against its load: a boom block, a cockpit or deck block, usually a cleat and often a ratchet. This collection holds ten Harken mainsheet systems and bases: self-contained two-speed systems rated by mainsail area, double fiddle and cross blocks for two-speed rigs, Hexa-Cat bases with a built-in 150 Cam-Matic cleat, and ceramic-bearing systems for beach catamarans. Choose by your mainsail area, purchase and class rather than by name.

Harken Mainsheet System Families in This Collection
  • Two-speed self-contained systems: the Two-Speed 3:1 / 6:1 (#332) is rated for mainsails to 240 ft² (22.3 m²) with end-boom sheeting, and the Two-Speed 4:1 / 8:1 (#383) to 350 ft² (32.4 m²). Both take 8 to 10 mm (5/16 to 3/8 in) line. Harken describes them as gross-trim/fine-tune systems that use less line than traditional ones, which reduces line clutter.
  • Double fiddle and cross blocks for two-speed rigs: the Double Fiddle (#385), the Double Fiddle with ratchet and 412 Cam-Matic (#401), the Double Fiddle with ratchet, cross block and 412 Cam-Matic (#386) and the Double Cross Block (#400), all with a 76 mm (3 in) primary sheave. The catalog gives no sail-area rating for these four, so check the product page for the secondary sheave and fit before you order.
  • Classic Hexa-Cat bases with 150 Cam-Matic: the 76 mm single (#170) and the 57 mm single (#193). Hexaratchets grip loaded sheets yet let you ease and trim quickly, and a switch on the side engages and disengages the ratchet. Harken combines the pair with Big Bullet or 57 mm (2.25 in) blocks for purchases from 5:1 to 8:1.
  • Catamaran systems: the GP Catamaran Mainsheet System 12:1 (#2800) is made for high-performance beachcats such as the Nacra 17 or F18. It uses insert-molded ceramic bearings and a single ratchet sheave in the bottom block, has a 545 kg (1,200 lb) maximum working load, and can be reconfigured as 10:1 or 11:1 to suit wind or crew; line is not included. The Zircon 40 mm Catamaran Mainsheet System (#Z40CMSS) is a lighter, tighter 40 mm system with ceramic bearings, a choice of 10:1, 11:1 or 12:1, an interchangeable Harken Power 3 ratchet sheave, an adjustable cam cleat angle and an extended head post for maximum mast rake.
How to Choose a Mainsheet System
  • Start with mainsail area: Harken rates the self-contained two-speed systems by mainsail area with end-boom sheeting. If your mainsail sits near a system's limit, step up to the next one rather than running it at its ceiling. Our mainsheet system sizing guide walks through the numbers.
  • 3:1 / 6:1 or 4:1 / 8:1: the first ratio is the gross-trim purchase for fast trimming and the second is the fine-tune purchase for holding the sail on the wind. The 4:1 / 8:1 puts less load on your hands and covers the bigger mainsail, but takes more line to trim.
  • Line diameter: 8 to 10 mm on the #332 and #383. For the other listings, read the maximum line on the product page.
  • Ratchet or plain: a ratchet block holds part of the load for you, which suits hand-held mainsheets on lighter boats. See the ratchet block guide.
  • Beachcat purchase: choose 10:1, 11:1 or 12:1 to match wind and crew; the GP system and the Zircon 40 mm system are both set up for that change.
Who It's For

Owners of small keelboats and cruisers whose mainsail sits inside the sail-area ratings, dinghy and one-design sailors rebuilding a mainsheet, and beachcat racers on a Nacra 17, F18 or similar. Comparing brands? Browse all mainsheet systems, the Harken ratchet blocks, or read how to choose a mainsheet traveler system.

Frequently Asked Questions

What is a two-speed mainsheet system?
It gives you two purchases in one set-up: a lower one for quick gross trim and a higher one for fine-tuning under load. Harken says its systems use less line than traditional gross-trim/fine-tune set-ups, so there is less line clutter in the cockpit.

How do I size a Harken mainsheet system?
By mainsail area with end-boom sheeting: up to 240 ft² (22.3 m²) for the 3:1 / 6:1 and up to 350 ft² (32.4 m²) for the 4:1 / 8:1. Boat length is only a rough guide; see the sizing guide.

What is the difference between the #332 and the #383?
The #332 is 3:1 / 6:1 and rated to 240 ft² (22.3 m²). The #383 is 4:1 / 8:1 and rated to 350 ft² (32.4 m²). Both use 8 to 10 mm line.

What does a Hexa-Cat base do?
It is a single block with a Hexaratchet and a built-in 150 Cam-Matic cleat. The ratchet grips a loaded sheet, a side switch turns it on or off, and Harken pairs the 57 mm and 76 mm bases with Big Bullet or 57 mm blocks for purchases from 5:1 to 8:1. See also our guide to fiddle blocks.

Can I change the purchase on a catamaran mainsheet system?
Yes. The GP system arrives as 12:1 and can be reconfigured as 10:1 or 11:1, with parts and reeving instructions included; the Zircon 40 mm system offers 10:1, 11:1 or 12:1. Line is not included with the GP system.