We Ship Worldwide! | FREE SHIPPING! for US Continental orders over $145. Click for details.

Facnor Spare Parts Model EC & CF - Selection Guide

Facnor Halyard Deflector Wheel (9.5mm Stays)

Facnor EC and CF are two of Facnor's headsail furling system families, and each accepts a specific set of spare parts identified by a MAURIPRO product code (FAC-series) and the Facnor manufacturer part number. The EC line is available as EC39 and EC47, while the CF line covers CF080, CF090, and CF105 — use the tables below to match the exact replacement part to your furler model.

Facnor EC & CF spare parts at a glance

Furler family Models covered Typical replacement parts How parts are identified
Facnor EC EC39, EC47 Drums, halyard swivels, bearings, feeders, extrusion screws, top/bottom fittings MAURIPRO FAC code + Facnor Mfr. part number, per item number
Facnor CF CF080, CF090, CF105 Continuous-line furling components (shared across all three sizes) MAURIPRO FAC code + Facnor Mfr. part number

What are the Facnor EC and CF furling systems?

Facnor EC and CF are headsail furling and reefing systems built for cruising and performance sailboats. The EC range (EC39 and EC47) is a drum-and-swivel furler sized by forestay and boat length, while the CF range (CF080, CF090, CF105) is a continuous-line furling family. Because these systems live at the bow and see constant load and UV exposure, having the correct replacement part number on hand keeps refits and repairs quick and accurate.

Facnor bottom extrusion telescopic section for Facnor headsail furlers
Facnor Bottom Extrusion Telescopic Section — a common wear item on Facnor furling foils, matched by furler model.

How do I find the right EC spare part?

Each item in the EC table is listed by item number with two columns per model: the MAURIPRO Part Num. (our FAC code, which links to the product page when it is stocked) and the Facnor Mfr. Code (the manufacturer's part number). Match your model — EC39 or EC47 — then read across to the correct code. Where a part shows a dash, that size does not use that component.

#Item EC39 EC47
Part Num. Mfr. Code Part Num. Mfr. Code
1 FAC2271 9170039040 FAC3019 9170047040
3 FAC0100 9171000306 FAC0102 9171000508
3 FAC0101 9171000310 FAC2161 9171000512
3 FAC3204 9171000312 FAC0104 9171000514
4 FAC0275 9130204390 FAC0276 9130204470
5 FAC0095 9130125152 FAC0083 9130125186
5 FAC2170 9130125158 FAC2172 9130125188
6 FAC3121 9190039040 FAC3109 9190047041
6 FAC3122 9190039041 FAC3110 9190047042
6 FAC2199 9190139040 FAC3171 9190147041
6b FAC2199 9190139040 FAC3171 9190147041
6 FAC6154 26132390206 FAC2200 26132470106
8 FAC2211 31001250600 FAC2212 31001250800
8b FAC2212 31001250800 FAC2213 31001251000
9 FAC3229 26134390036 FAC3217 26134470036
10 - 9130128392 FAC2226 9130128470
11 FAC0047 9130124150 FAC0047 9130124150
12 - 26136390166 FAC0027 26136470166
Facnor sail feeder assembly for Facnor furlers
Facnor Sail Feeder Assembly — guides the luff tape into the extrusion during hoisting; verify the code against your model.

What spare parts fit the CF080, CF090 and CF105?

Across the CF line, the listed spare parts are shared by all three sizes — CF080, CF090, and CF105 use the same MAURIPRO FAC code and Facnor manufacturer part number for each item. Match the item you need and order the single shared code that covers all three models.

#Item CF080 CF090 CF105
Part Num. Mfr. Code Part Num. Mfr. Code Part Num. Mfr. Code
23 FAC2518 51094015161 FAC2518 51094015161 FAC2518 51094015161
23 FAC2519 51094025161 FAC2519 51094025161 FAC2519 51094025161
23 FAC0305 51094035180 FAC0305 51094035180 FAC0305 51094035180
23 FAC3341 51095085201 FAC3341 51095085201 FAC3341 51095085201
23 FAC3321 51095085251 FAC3321 51095085251 FAC3321 51095085251
23 FAC6122 51095105200 FAC6122 51095105200 FAC6122 51095105200
23 FAC2520 51095105201 FAC2520 51095105201 FAC2520 51095105201
23 FAC2521 51095145250 FAC2521 51095145250 FAC2521 51095145250
23 FAC2522 51095145251 FAC2522 51095145251 FAC2522 51095145251
NA FAC0110 14098016300 FAC0110 14098016300 FAC0110 14098016300

Which code should I order — the FAC number or the Mfr. Code?

Either identifies the same part. Order by the MAURIPRO FAC code (Part Num.) to go straight to the product page when the item is in stock; use the Facnor Mfr. Code to confirm the exact part with our team if a listing is unavailable. When a part page shows "product unavailable," it can still be sourced — just send us the Mfr. Code.

Facnor bottom extrusion screws pack for Facnor furlers
Facnor Bottom Extrusion Screws — small fasteners like these are easy to lose during service, so keep spares matched to your foil.

Frequently asked questions

Which Facnor EC and CF models does this guide cover?

It covers the EC line (EC39 and EC47) and the CF line (CF080, CF090, and CF105), with a spare-parts table for each family.

How do I know which spare part fits my Facnor furler?

Find your model column (for example EC47 or CF090), then read across the item row to get the matching MAURIPRO FAC code and Facnor manufacturer part number.

Do the CF080, CF090 and CF105 share the same spare parts?

Yes. For each listed item, all three CF sizes use the same FAC code and the same Facnor Mfr. Code, so one part number covers all three furlers.

What does the Facnor Mfr. Code mean?

It is Facnor's own manufacturer part number for the component. It uniquely identifies the part and lets our team confirm or source an item even when a web listing is unavailable.

What if the part shows as unavailable on the website?

An "unavailable" listing does not mean the part cannot be supplied. Contact our rigging experts with the Mfr. Code and we will help you source the correct replacement.

Shop all Facnor Furlers & Headsail Foils →

If you have additional inquiries or need help with anything sailing related, don't hesitate to contact our experts! We'll be glad to help.

You may also be interested in

Leave a comment

Please note: comments must be approved before they are published.