Facnor Spare Parts Model Facslide+ & Facslide Old - Selection Guide

Facnor's Facslide furling systems come in two generations — the current Facslide+ (F10+, F20+, F30+, F40+) and the earlier Facslide OLD (F10 OLD, F20 OLD, F30 OLD, F40 OLD) — and each shares a common exploded-diagram layout so you can order spare parts by item number. Use the cross-reference tables below to match your furler size and the numbered component on your diagram to the correct MAURIPRO part number and Facnor manufacturer code.

Facnor Facslide spare parts at a glance

What is the Facnor Facslide furling system?

Facslide is Facnor's headsail furling system, built to roll and reef a genoa or jib from the cockpit. It is offered in four sizes — roughly F10 through F40 — matched to increasing boat size and forestay load. The Facslide+ range is the current production version, while Facslide OLD covers earlier units that remain in service on many cruising boats. Both generations use a similar architecture of a drum, torque tube, extrusion sections, halyard swivel and connectors, so replacement parts are identified the same way: by a numbered item on the exploded diagram.

How do I find the right Facslide spare part?

Every Facslide part is keyed to a number on Facnor's exploded parts diagram (for example, item 1 for a lower extrusion component, or the drum, swivel and connector items further down). To order, first identify your exact furler model (F10+ through F40+, or F10 OLD through F40 OLD), then locate the numbered part on your diagram, and read across the table below to the matching MAURIPRO part number. Each part number links to the product page; the adjacent column shows the original Facnor manufacturer code so you can confirm an exact match. A dash (-) means that item is not used on that particular model.

Facslide+ (F10+ / F20+ / F30+ / F40+) spare parts

Note: Click a part number to open that item on our website.

Facslide OLD (F10 / F20 / F30 / F40 OLD) spare parts

Note: Click a part number to open that item on our website. If your furler is an older Facslide, use this table rather than the Facslide+ chart above.

Frequently asked questions

How do I tell a Facslide+ from a Facslide OLD?

Facslide+ models carry a plus in the name (F10+, F20+, F30+, F40+) and are the current-production version; the earlier units are labeled F10 OLD through F40 OLD. If you are unsure, match the numbered parts on your furler against both tables, or send us photos and the furler diagram.

What do the item numbers in the tables mean?

They correspond to the numbered callouts on Facnor's exploded parts diagram for the Facslide system. Find the number on your diagram, then read across to your furler size to get the correct part number.

What is the Mfr. Code column for?

It is Facnor's original manufacturer part code. Use it to double-check that a MAURIPRO part number is an exact match for the component on your furler before you order.

Why is a part shown as a dash or "unavailable"?

A dash (-) means that item is not fitted to that model. A part number that routes to our "product unavailable" page is a component we can still source on request — contact our rigging team for availability.

Which parts wear out most on a Facslide furler?

Moving and load-bearing parts — bearings, the halyard swivel, the sail feeder and drum components — see the most wear. Inspect these first if the furler feels stiff or notchy.

Can you help me identify the right spare if I'm not sure?

Yes. Send us your furler model and, ideally, a photo of the part and the exploded diagram, and our rigging team will confirm the correct part number for you.

If you have additional inquiries or need help with anything sailing related, don't hesitate to contact our experts! We'll be glad to help.

Shop all Facnor Furlers & Headsail Foils →

You may also be interested in

• Facnor Spare Parts Model LS - Selection Guide
• Facnor Spare Parts Model LX - Selection Guide
• Facnor Spare Parts Model RX - Selection Guide